Axpert King 5000 W 48 V off-grid inverter with 145 V MPPT controller and charger, PF 1.0
Code: OST_570011Product detailed description
Off-grid inverter, solar controller and charger in one
The Axpert King 48 V 5000 W PF1 is a combined off-grid inverter with public grid backup and a battery charger. The built-in MPPT solar controller accepts panel voltages up to 145 V and a PV array of up to 4000 Wp, charging the batteries with up to 80 A. Thanks to a power factor of 1.0 the inverter delivers the full 5000 W, with a peak of 10000 VA.
Unlike other Axperts it works with double conversion AC-DC-AC, similar to the best types of UPS: even if the input is, for example, 245 V AC, the loads always receive a pure 230 V sine wave. Transfer time is 0 ms. Compared with the older version it has a more powerful MPPT, better design and higher charging voltages for batteries.
The inverter is optimised for lead-carbon batteries and can also communicate with Pylontech LiFePO4 batteries. It can be configured on the display or from a phone or PC (via Bluetooth or cable).
Functions and protections
- adjustable grid charging current and AC or solar input priority via the LCD
- smart charger for longer battery life
- protection against overload (switches to bypass at 110–200 %), short circuit (the inverter shuts down) and battery deep discharge (switches to bypass)
- automatic restart after overload or overheating has cleared
- cold start for gradual start-up of loads
- volt-free relay (dry contact) signalling discharged or fully charged batteries – for load control and protections
- low self-consumption in standby mode
Connection and compatibility
The MPPT operating range is 60–115 V with an open-circuit voltage of no more than 145 V and input current up to 50 A. Pylontech batteries are connected with a UTP cable to the RS485 port; set the battery's first DIP switch to 9600 bps. Pylontech B batteries use the pin assignment 1-3, 3-1, 2-5, 5-2, Pylontech C uses 3-8 / 5-7. Installation and commissioning must be carried out by a qualified person and the equipment is subject to an initial electrical inspection.
Frequently asked questions
Can the inverters be connected in parallel or in three phases?
No, this version of the inverter does not allow parallel or three-phase connection.
Which batteries can I use?
The battery system must have a nominal voltage of 48 V. The inverter is optimised for lead-carbon batteries and communicates with Pylontech LiFePO4 batteries via RS485.
How is the inverter configured?
Directly on the LCD display, or from a phone or computer via Bluetooth or cable.
Technical parameters
| Brand | Axpert |
| Manufacturer | Voltronic Power |
| Order number | 92-930960-00G-610-186 |
| Type | off-grid inverter with grid backup and MPPT |
| Rated power | 5000 VA / 5000 W (PF 1.0) |
| Peak power | 10000 VA |
| Output voltage | 230 V AC, pure sine wave |
| AC input voltage | 230 V, 50/60 Hz (auto sensing) |
| Transfer time | 0 ms |
| Max. efficiency | 93 % (line) / 90 % (battery) |
| Battery voltage | 48 V DC |
| Float voltage | 54 V DC |
| Max. charge current | 140 A (60 A from grid) |
| Max. PV array power | 4000 W |
| Max. PV open-circuit voltage | 145 V DC |
| MPPT range | 60–115 V |
| Max. PV input current | 50 A |
| Parallel / 3-phase connection | no |
| Dimensions (H × W × D) | 525 × 303 × 140 mm |
| Weight | 13.1 kg |
Additional parameters
| Category: | Photovoltaics |
|---|---|
| Warranty: | 2 years |
| Weight: | 13.1 kg |
| Brand: | Axpert |
| Manufacturer: | Voltronic Power |
| Order number: | 92-930960-00G-610-186 |
| Type: | off-grid inverter with grid backup and MPPT |
| Rated power: | 5000 VA / 5000 W (PF 1.0) |
| Peak power: | 10000 VA |
| Output voltage: | 230 V AC, pure sine wave |
| AC input voltage: | 230 V, 50/60 Hz (auto sensing) |
| Transfer time: | 0 ms |
| Max. efficiency: | 93 % (line) / 90 % (battery) |
| Battery voltage: | 48 V DC |
| Float voltage: | 54 V DC |
| Max. charge current: | 140 A (60 A from grid) |
| Max. PV array power: | 4000 W |
| Max. PV open-circuit voltage: | 145 V DC |
| MPPT range: | 60–115 V |
| Max. PV input current: | 50 A |
| Parallel / 3-phase connection: | no |
| Dimensions (H × W × D): | 525 × 303 × 140 mm |
| Weight: | 13.1 kg |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!
