press fittings, connectors for ALPEX PRESS
-
straight press couplings
-
reducing straight press couplings
-
straight press adapters - male thread
-
straight press adapters - female thread
-
straight press adapters - male thread with O-ring
-
straight press adapters - union nut EK
-
straight press adapters - union nut
-
press elbows 90
-
press elbows 45
-
press elbows 90 - male thread
-
press elbows 90 - female thread
-
press t-pieces
-
T-pieces press - external thread
-
press t-pieces - female thread
-
press reducing t-pieces
-
branch T-pieces press
-
press end caps
-
straight press couplings - copper
-
elbows press 90° - with connecting tube
-
T-pieces press with connecting tube
-
press wall plates
-
shut-off valves press
-
mounting templates
-
caps for wall plates
-
Accessories for ALPEX
-
press fittings, connectors PRESS - PPSU
-
press fittings, connectors for ALPEX PUSH - PPSU
-
Knowledge Center - Press Fittings, Couplings for ALPEX PRESS
Product sorting
374 items total
List of products
IVAR press fittings - connectors, elbows, sleeves, T-pieces, caps, wall plates, etc.
The press fitting system is efficient, reliable and simple to install for various distributions of hot and cold water, heating and underfloor heating. It is based on the principle of press joints, suitable for interior and exterior use.
Frequently Asked Questions
- What is the difference between PRESS and PUSH fittings? PRESS fittings are joined permanently using a press tool with the appropriate jaws, PUSH fittings allow a mechanical, detachable connection without professional press tools.
- What media are ALPEX PRESS fittings suitable for? For cold and hot water distribution, central heating and underfloor heating, typically up to PN 10 and a temperature of +95 to +120 °C depending on the specific type.
- What material are IVAR press fittings made of? Most fittings are made of nickel-plated brass CW617N with a stainless steel sleeve and EPDM seal, part of the range (e.g. the PPSU series) is made of high-temperature PPSU plastic.
- Can a press joint be disassembled after pressing? No, a PRESS joint is permanent and non-detachable once pressed - in the case of a PUSH version, the joint is mechanical and can be released with a special assembly tool.