Shafts and Tanks
-
Sewage Pumping Shafts, Pumping Shafts MIDI + WQ 15-7-1,1 with Grinder Pump
-
Sewage Pumping Shafts, Pumping Shafts KOMPAKT + KRAKEN 1800 with Grinder Pump
-
Sewage Pumping Shafts, Pumping Shafts JUMBO + ZWQ 1500 with Cutting Blade
-
Sewage Pumping Shafts, Pumping Shafts KOMPAKT MAX + KRAKEN 1800 DF with Grinder Pump
-
Sewage Pumping Shafts, Pumping Shafts ERA + WQI 15-7-1,1 with Grinder Pump
-
Water Meter Shafts
-
Inspection Shafts
-
Well Shafts
-
Knowledge Center - Shafts and Tanks
Product sorting
List of products
The shaft bottom is manufactured as a separate component produced by injection...
The junction chamber base with an upper diameter of DN 400 has 4 DN 160 inlets....
The shaft bottom is manufactured as a separate component produced by injection...
The self-supporting, circular water meter shaft MONOLIT 1300 is designed for...
This water meter chamber with a volume of 1.5 m3 is made from 6 mm and 8 mm thick...
The water meter shaft with frost protection is made of 6 mm thick polypropylene...
The medium-sized circular water meter shaft with frost protection is made of 6 mm...
The water meter shaft with frost protection and a volume of 1.5 m3 is made of 7 mm...
Plastic sewer inspection chambers represent a modern, ecological and operationally...
Plastic sewer inspection chambers represent a modern, ecological and operationally...
Plastic sewer inspection chambers represent a modern, ecological and operationally...
Plastic sewer inspection chambers represent a modern, ecological and operationally...
Plastic sewer inspection chambers represent a modern, ecological and operationally...
Plastic sewage inspection shafts are a modern, environmentally friendly and...
Plastic sewer inspection chambers represent a modern, ecological and operationally...
The DN 315/160/2500 in-line inspection chamber with backflow valve is installed on...
Plastic sewer inspection chambers represent a modern, ecological and operationally...
The DN 315/160/3000 in-line inspection chamber with backflow valve is installed on...
Plastic sewer inspection chambers represent a modern, ecological and operationally...
Plastic sewer inspection chambers represent a modern, ecological and operationally...
Water meter shafts are used for installing water meters or other measuring devices. They make inspection easier and give people simple access to these meters. They are used for residential houses, cottages or similar facilities for measuring water flow, as well as for finishing off well boreholes.
Plastic water tanks are mainly used as rainwater tanks and often replace various storage tanks or water barrels. The plastic water tanks we offer are our own products. We can also adapt them to customer requirements. These plastic water tanks are watertight and made of polypropylene, which is hygienically safe.
Sewage pumping shafts, or pumping stations, are designed everywhere it is necessary to bridge a height difference by pumping and transporting a given medium from point A to point B. This mainly concerns sewage wastewater, as well as rainwater, utility water and drinking water.
Plastic septic tanks that we offer are monolithic, 100% watertight and made of PE-HD (high-density polyethylene). Their solid construction increases stability and resistance to soil movement, which can continue for up to 5 years after excavation. When the tank is used as a septic tank, easy access for sewage tanker vehicles is possible. A plastic septic tank or wastewater tank can also be used to collect rainwater.
Inspection shafts are used for inspection on longer sewer connections or as a junction of two house connections into one sewer pipe. They are also used for draining rainwater from roads and buildings. Nowadays it is possible to use a smaller-diameter plastic sewer inspection shaft instead of the previously used concrete shaft with a diameter of 800 - 1200mm. Cleaning and inspection are now carried out using equipment, so there is no need for people to enter the shaft.