heat pumps

Bestsellers

 (–10 %)
200,37 €
(162,90 € excl. VAT)
 (–10 %)
135,05 €
(109,80 € excl. VAT)
 (–10 %)
834,68 €
(678,60 € excl. VAT)

Product sorting

16 items total

List of products

Vykurovacia technika Aktívny priestorový snímač - pre LEGEND
–10 %
241,20 € excl. VAT
296,68 €

Active room sensor - for LEGEND

IHP086U6003
Vykurovacia technika Príložný snímač teploty s klipom - pre ITEC, LEGEND - pre potrubie pr. 22mm
–9 %
11,89 € excl. VAT
14,62 €

Clip-on temperature sensor - for ITEC, LEGEND - for pipe dia. 22mm

IHP086U5382
Vykurovacia technika Pripojovacie šróbenie - pre vonkajšiu a vnútornú jednotku ATHENA TOTAL
–10 %
65,70 € excl. VAT
80,81 €

Connection fitting - for outdoor and indoor unit ATHENA TOTAL

IHP086U567AH
Vykurovacia technika Pripojovacie šróbenie - pre vnútornú jednotku ITEC-P
–9 %
22,86 € excl. VAT
28,12 €

Connection union - for internal unit ITEC-P

IHP086U5671
Vykurovacia technika Pripojovacie šróbenie - pre TČ radu CALIBRA DUO, ATLAS DUO
–10 %
58,95 € excl. VAT
72,51 €

Connection union - for TC radu CALIBRA DUO, ATLAS DUO

IHP08645682
Vykurovacia technika SADA cirkulácie teplej vody - pre ITEC-T, ATHENA-T, LEGEND, CALIBRA, ATLAS
–10 %
140,40 € excl. VAT
172,69 €

Domestic hot water circulation set - for ITEC-T, ATHENA-T, LEGEND, CALIBRA, ATLAS

IHP086L2260
Vykurovacia technika Rozširovací modul - pre ITEC
–10 %
783,90 € excl. VAT
964,20 €

Expansion module - for ITEC

IHP086L3047
Vykurovacia technika Rozširovací modul EM3 - pre MEGA; externá montáž
–10 %
680,40 € excl. VAT
836,89 €

Expansion module EM3 - for MEGA; external installation

IHP086L5981
Vykurovacia technika Rozširovací modul EM3 - pre MEGA; interná montáž
–10 %
580,50 € excl. VAT
714,02 €

Extension modul EM3 - for MEGA; internal installation

IHP086L5982
Vykurovacia technika Nezámrzný ventil - 1"; 10bar; 0 °C ÷ 65 °C
–10 %
109,80 € excl. VAT
135,05 €

Frost-protection valve - 1"; 10bar; 0 °C ÷ 65 °C

108601
Vykurovacia technika Relé sada - signál pre čerpadlo s funkciou Optimum 3-10V prevádza na on/off
–10 %
622,80 € excl. VAT
766,04 €

Rele set - signal for pump s funkciou Optimum 3-10V converts to on/off

IHP086U0937
Vykurovacia technika Samoregulačný vykurovací kábel - pre ITEC - 2m
–10 %
91,80 € excl. VAT
112,91 €

Samoregulacny heating kabel - for ITEC - 2m

IHP928206
Vykurovacia technika Podstavec - V=150-200mm; bez silentblokov - pre AURA, ATEC, ITEC E; sada 2ks
–10 %
162,90 € excl. VAT
200,37 €

Stand - H=150-200mm; without anti-vibration mounts - for AURA, ATEC, ITEC E; set...

IHP086L5969
Vykurovacia technika Stojan 400 - pre ATHENA
–10 %
642,60 € excl. VAT
790,40 €

Stand 400 - for ATHENA

IHP205066
Vykurovacia technika Stojan typu T - pre ATHENA
–10 %
678,60 € excl. VAT
834,68 €

T-type stand - for ATHENA

IHP205067
Vykurovacia technika Nástenný držiak 600 - pre AURA
–10 %
116,10 € excl. VAT
142,80 €

Wall bracket 600 - for AURA

IHP086L5949

Listing controls

16 items total

Heat pumps are a renewable energy source for heating, domestic hot water preparation and, in some cases, cooling. Here you will find products from leading European manufacturers such as the Swedish brand Thermia or the Swiss brand CTA. Specifically, these are air-source heat pumps (air/water) for the family house and apartment segment in outdoor monobloc versions, which have recently become a trend for their reliability and minimal maintenance requirements. There are also ground and water source heat pumps (ground/water, water/water) for the family house and apartment segment as well as industrial and commercial heat pumps with outputs of over 1 MW. And last but not least, accessories for these heat pumps.

 

Frequently Asked Questions

  • What is the difference between an air/water and a ground/water heat pump? Air/water draws heat from the outside air, installation is simpler and cheaper (no ground boreholes needed). Ground/water uses geothermal energy via a ground collector or borehole, has more stable output even at low outdoor temperatures, but the investment is higher.
  • Can a heat pump also be used for cooling? Most IVAR.HP and Thermia models also offer reverse operation for passive or active cooling in the summer months.
  • What accessories are needed for installation? Depending on the series (ATEC/ITEC, ATHENA, LEGEND/ATLAS/CALIBRA, MEGA), these are mainly connection fittings, temperature sensors, expansion modules and buffer vessels - you will find them in separate accessory subcategories.
  • What outputs are the pumps designed for? The range covers family houses and apartments as well as industrial and commercial applications with outputs of over 1 MW.
Vytvořil Shoptet | Design Shoptak.cz.