IVAR.TER-HO Flexible Hose for Connecting the MEGA Heat Pump – DN 35 mm, 620 mm
Code: IHP086U6001Related products
Product detailed description
The IVAR.TER-HO flexible hose (code IHP086U6001) is used to connect a MEGA series heat pump to the heating system pipework or, if required, to the domestic hot water piping. It is intended for the warm side of the heat pump. Its main task is to stop vibrations from spreading: it separates the compressor, the source of vibration, from the pipework and building structures that would otherwise carry it further.
Design
- nominal size DN 35 mm, length 620 mm
- compression fitting with ring (olive) for 35 mm copper pipe on one end
- R32 male thread on the other end
- rubber inner layer, steel outer jacket, brass fittings
- operating temperature 0 to 65 °C
Installation notes
Do not twist the hose during installation and hold the opposite side with a second spanner when tightening threaded joints. The hose must be neither stretched nor completely straight – position the ends so that it forms a gentle curve without kinking in the bend. Use rigid pipe bends at the connections so that the hose is not unnecessarily stressed in the bends. The IVAR.TER-HO range for the MEGA also includes DN 28 mm/600 mm and DN 42 mm/820 mm versions.
Technical data
| Code | IHP086U6001 |
| Brand | IVAR |
| Type | IVAR.TER-HO |
| Application | MEGA series heat pumps |
| Connection side | heating system (warm side) |
| Nominal size | DN 35 mm |
| Length | 620 mm |
| Connection 1 | compression fitting with ring (olive) for Cu 35 mm |
| Connection 2 | R32 male thread |
| Inner layer | rubber |
| Outer jacket | steel |
| Fitting material | brass |
| Operating temperature | 0 – 65 °C |
Additional parameters
| Category: | accessories for IVAR.HP MEGA heat pump series |
|---|---|
| Warranty: | 2 years |
| Code: | IHP086U6001 |
| Brand: | IVAR |
| Type: | IVAR.TER-HO |
| Application: | MEGA series heat pumps |
| Connection side: | heating system (warm side) |
| Nominal size: | DN 35 mm |
| Length: | 620 mm |
| Connection 1: | compression fitting with ring (olive) for Cu 35 mm |
| Connection 2: | R32 male thread |
| Inner layer: | rubber |
| Outer jacket: | steel |
| Fitting material: | brass |
| Operating temperature: | 0 – 65 °C |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!
IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.
Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.
Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.
“Made in Italy” adds value
IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.
The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.
Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.
The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.
As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.