Axpert MAX E 11 kW 48 V TWIN off-grid inverter with 2 × 450 V MPPT, WiFi and parallel operation

Code: OST_570105
Not rated Rating details
1 235,04 € / pcs 1 004,10 € excl. VAT Measure price:
International delivery
In stock at supplier (1–2 weeks)

Detailed information

Product detailed description

Two MPPT inputs and 11 kW of power

Axpert MAX E 48 V 11 kW TWIN PAR-B is a completely new hybrid off-grid inverter with public grid backup and a battery charger. It has two independent high-voltage MPPT controllers, each for a PV array of up to 5500 Wp – 11 kW in total. The panel open-circuit voltage can be up to 500 V, the MPPT works in the 90–450 V range and at least 240 V Vmpp is recommended.

Compared with the previous version, besides the two MPPTs it offers a better design, higher charging voltages and programmable display backlighting. The TWIN function adds a second programmable output – you can connect a water heater to it, for example, and switch it on during solar surplus. Thanks to power factor correction it delivers 11 kW even into slightly capacitive or inductive loads, and its self-consumption is low for its output, only 70 W.

It communicates directly with Pylontech batteries via the supplied data cable and can also run without a battery if needed. In that case, however, it cannot completely prevent export to the grid – it is very small (tens of watts) and occurs only briefly when loads switch. For correct operation we therefore recommend always having batteries connected.

Functions and protection

  • pure sine wave; in battery mode it keeps frequency and phase identical to the grid input for seamless switching
  • AC or solar input priority selectable on the LCD, adjustable grid charging current
  • protection against overload (switches to bypass at 110–200 %), short circuit (the inverter shuts down) and battery discharge (switches to bypass)
  • automatic restart after overload or overheating clears and cold start for gradual load start-up
  • smart charger and potential-free relay (dry contact) signalling battery status
  • WiFi for connection to the home network and the WatchPower mobile app

Connection and compatibility

The grid input voltage is 230 V AC with a selectable range of 170–280 V (for computers) or 90–280 V (for appliances); the transfer time is 10 ms or 20 ms respectively. Each of the two PV inputs handles a current of 18 A. Pylontech batteries are connected with a UTP cable to the RS485 port: for type B with pin assignment 1-3, 3-1, 2-5, 5-2, for type C 3-8 / 5-7. Set the speed to 9600 bps with the first DIP switch on the battery.

This is regulated technical equipment: installation and commissioning must be carried out by a qualified person and the equipment is subject to an initial inspection.

Frequently asked questions

Can MAX E inverters be combined?
Yes, the inverter supports both parallel and three-phase connection.

What is the TWIN output for?
It is a second programmable output, for example for a water heater, which switches on during solar surplus.

Can it work without a battery?
It can, but small short-term export to the grid cannot be completely prevented, so we recommend batteries.

Technical specifications

BrandAxpert
ManufacturerVoltronic Power
Typeoff-grid inverter with grid backup and MPPT
Rated power11000 VA / 11000 W (PF 1.0)
Peak power22000 VA
Output voltage230 V AC, pure sine wave
Transfer time10 ms (computers) / 20 ms (appliances)
Max. efficiency93 %
Battery voltage48 V DC
Float voltage54 V DC
Max. charge current150 A (150 A from grid)
Max. PV array power11000 W (2 × 5500 W)
Max. PV open-circuit voltage500 V DC
MPPT range90–450 V
Max. PV input current2 × 18 A
Second TWIN outputyes
Parallel / 3-phase connectionyes
CommunicationWiFi, WatchPower app
Dimensions (H × W × D)533.6 × 432.5 × 147.4 mm
Weight18.4 kg

Additional parameters

Category: Photovoltaics
Warranty: 2 years
Weight: 18.4 kg
Brand: Axpert
Manufacturer: Voltronic Power
Type: off-grid inverter with grid backup and MPPT
Rated power: 11000 VA / 11000 W (PF 1.0)
Peak power: 22000 VA
Output voltage: 230 V AC, pure sine wave
Transfer time: 10 ms (computers) / 20 ms (appliances)
Max. efficiency: 93 %
Battery voltage: 48 V DC
Float voltage: 54 V DC
Max. charge current: 150 A (150 A from grid)
Max. PV array power: 11000 W (2 × 5500 W)
Max. PV open-circuit voltage: 500 V DC
MPPT range: 90–450 V
Max. PV input current: 2 × 18 A
Second TWIN output: yes
Parallel / 3-phase connection: yes
Communication: WiFi, WatchPower app
Dimensions (H × W × D): 533.6 × 432.5 × 147.4 mm
Weight: 18.4 kg

Product rating

Be the first who will post an article to this item!

Do not fill out this field

How would you rate this product? Choose 1 to 5 stars, where 1 is the worst and 5 is the best rating.

Discussion

Be the first who will post an article to this item!

Do not fill out this field
Vytvořil Shoptet | Design Shoptak.cz.