EUROSWIM 300 M pool pump (DAB.EUROSWIM) – self-priming with pre-filter, single-phase, 2.2 kW

Product detailed description

Powerful pump for pool filtration

The EUROSWIM 300 M made by DAB is a self-priming pool pump with a built-in pre-filter. Among the single-phase versions of the EUROSWIM range it is the most powerful – the motor has a rated output of 2.2 kW (3 HP) and a power input of up to 2800 W. The range covers flow rates up to 42 m³/h and heads up to 22 m. The pump runs very quietly and reliably; it can also be used outside the pool, for example for handling aggressive liquids in agriculture and industry.

Chlorine-resistant design

• pump casing and impeller made of glass-fibre reinforced technopolymer, diffuser made of reinforced technopolymer
• pre-filter with transparent polycarbonate lid – the condition of the strainer basket is visible at a glance
• mechanical seal with NBR elastomer and AISI 316 stainless steel parts
• 2-pole asynchronous motor with external fan cooling, housing with special electrophoretic coating against oxidation
• integrated thermal and overcurrent protection
• 2" suction and discharge ports

Pumped liquids and operating conditions

The pump handles clean water as well as water slightly contaminated with suspended particles or long fibres. It is also designed for particularly aggressive water with high chlorine or bromine content, with PHMB or treated by salt electrolysis. Maximum liquid temperature +60 °C, maximum ambient temperature +50 °C, operating pressure up to 2.5 bar. It is supplied from a single-phase 220–240 V/50 Hz network (rated current 12 A, capacitor 40 µF/450 V); the electrical connection must be made by a qualified electrician.

The same output in a three-phase version is offered by the EUROSWIM 300 T, while the EUROSWIM 50 to 200 models cover smaller requirements.

Technical data