IVAR.KTV3-125 boiler module DN 25 with 3-way mixing valve and DAB.EVOSTA2 40-70/180 pump – SALE
Code: IVA49072522DABRelated products
Product detailed description
The IVAR.KTV3-125 boiler module is a ready-built valve assembly that prepares the water for a heating circuit and blends it to the required temperature. It suits heat sources whose temperature swings widely, such as solid-fuel boilers.
- radiator, underfloor and wall heating in a closed hot-water circuit
- output up to 37.2 kW at ΔT 20 K, flow 1600 l/h, Kvs 8.3
- supplied with: flow and return pipes, 3-way mixing valve, DAB.EVOSTA2 40-70/180 electronic pump, ball valves with thermometers, check valve and EPP insulation
- heat source connection 6/4" M, heating circuit 1" F, 125 mm centre distance
The IVAR.SRVM ECOMIX 230 V actuator and the IVAR.KIT K2 wall bracket are ordered separately. Flush the system before commissioning; installation should be done by a qualified installer.
Technical data
| Code | IVA49072522DAB |
| Manufacturer | IVAR (čerpadlo DAB) |
| Type | IVAR.KTV3-125 |
| Nominal size | DN 25 |
| Max. output (ΔT 20 K) | 3. kW |
| Max. flow | 1600 l/h |
| Max. operating pressure | 6 bar |
| Max. operating temperature | 95 °C |
| Connection | inlet 6/4" M, outlet 1" F |
| Circulation pump | DAB.EVOSTA2 40-70/180 |
| Dimensions | 400 × 250 × 240 mm |
Frequently asked questions
Which heating circuits is the module meant for?
Radiator, underfloor and wall heating in closed hot-water systems. The mixing valve also allows a heat source with widely varying temperature, such as a solid-fuel boiler, to be connected.
Is the actuator part of the module?
No, the IVAR.SRVM ECOMIX 230 V actuator is optional. The IVAR.KIT K2 wall bracket is also added separately.
Which pump does this code include?
The DAB.EVOSTA2 40-70/180 electronic pump. The same module without a pump has a different code, IVA49072503.
Additional parameters
| Category: | boiler modules and assemblies IVAR.KS |
|---|---|
| Warranty: | 24 |
| Code: | IVA49072522DAB |
| Manufacturer: | IVAR (čerpadlo DAB) |
| Type: | IVAR.KTV3-125 |
| Nominal size: | DN 25 |
| Max. output (ΔT 20 K): | 3. kW |
| Max. flow: | 1600 l/h |
| Max. operating pressure: | 6 bar |
| Max. operating temperature: | 95 °C |
| Connection: | inlet 6/4" M, outlet 1" F |
| Circulation pump: | DAB.EVOSTA2 40-70/180 |
| Dimensions: | 400 × 250 × 240 mm |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!
IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.
Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.
Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.
“Made in Italy” adds value
IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.
The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.
Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.
The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.
As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.
