BRA.J9.100 DN 65 wafer butterfly valve with electric actuator BRA 005 – 230 V, ON/OFF – SPECIAL OFFER
Code: J9.100.065E16CProduct detailed description
The set BRA.J9.100 + BRA 005 (code J9.100.065E16C) combines the WAFER J9 wafer shut-off valve with a nominal diameter DN 65 and the electric actuator BRANDONI BRA 005. The valve is installed between two pipe flanges and the actuator rotates it by 90° to the open or closed position. It is suitable for automatic closing of heating, air conditioning, and water distribution branches in technical and industrial facilities.
Valve BRA.J9.100
- body made of cast iron, disc made of nickel-plated cast iron, sealing EPDM, FKM O-ring
- maximum operating pressure PN 16, operating temperature -10 °C to +120 °C
- construction length 46 mm, connection of the actuator via flange according to ISO 5211
- not suitable for steam, oils and hydrocarbons
Electric actuator BRA 005
- supply voltage 230 V AC, ON/OFF mode, torque 50 Nm, switching time 90° in 30 s
- housing made of anodized and powder-coated aluminum, protection class IP 68
- four limit switch contacts open/closed for remote position indication
- visual position indicator, thermal overload protection, manual control using an Allen key
The actuator operates at ambient temperatures from -25 °C to +70 °C. The electrical connection must be performed by a qualified electrician.
Technical parameters
| Code | J9.100.065E16C |
| Brand | IVAR |
| Valve manufacturer | BRANDONI |
| Type | BRA.J9.100 + BRA 005 |
| Nominal diameter | DN 65 |
| Valve construction length | 46 mm |
| Maximum operating pressure | PN 16 |
| Operating temperature | -10 °C to +120 °C |
| Material | body cast iron, disc nickel-plated cast iron, sealing EPDM, O-ring FKM |
| Electric actuator | BRA 005, 230 V AC, ON/OFF |
| Torque | 50 Nm |
| Switching time | 30 s / 90° |
| Actuator protection class | IP 68 |
| Actuator ambient temperature | -25 °C to +70 °C |
Frequently asked questions
How is the valve mounted in the pipe?
It is a WAFER flanged version – the valve is installed between two DN 65 pipe flanges. Its construction length is 46 mm.
Can the valve be operated manually?
Yes. The actuator has a manual mode and the valve can be switched using an Allen key, which is stored on the actuator when not in use.
Is the actuator suitable for continuous regulation?
This set has a 230 V actuator in ON/OFF mode, so it fully opens or closes the valve. For 0–10 V signal control, IVAR offers a set with 24 V supply (code J9.100.065V16B).
For which media is the valve intended?
For heating, air conditioning, and water distribution systems at temperatures from -10 °C to +120 °C and pressures up to PN 16. It is not suitable for steam, oils or hydrocarbons.
Additional parameters
| Category: | BRA.J9.100 WAFER J9 butterfly valves - nickel-plated cast iron disc |
|---|---|
| Warranty: | 2 years |
| Availability: | In stock or at supplier |
| Code: | J9.100.065E16C |
| Brand: | IVAR |
| Valve manufacturer: | BRANDONI |
| Type: | BRA.J9.100 + BRA 005 |
| Nominal size: | DN 65 |
| Valve face-to-face length: | 46 mm |
| Max. operating pressure: | PN 16 |
| Operating temperature: | -10 °C to +120 °C |
| Material: | body cast iron, disc nickel-plated cast iron, EPDM seal, FKM O-ring |
| Electric actuator: | BRA 005, 230 V AC, ON/OFF |
| Torque: | 50 Nm |
| Operating time: | 30 s / 90° |
| Actuator protection rating: | IP 68 |
| Actuator ambient temperature: | -25 °C to +70 °C |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!
IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.
Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.
Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.
“Made in Italy” adds value
IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.
The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.
Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.
The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.
As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.