Brass ball valve 3/4" with compression nut and handles

Product detailed description

The brass ball valve with a 3/4" connection thread is used for closing water and central heating circuits in buildings. It is equipped with a compression nut and has a nominal pressure of 25 bar. It is delivered with a pair of handles, one blue and one red.

The ball valve works by rotating a ball with a hole inside the body. In the open position, the medium passes through the hole in the ball, while in the closed position, the flow is interrupted. Therefore, it is suitable for quickly shutting off a section of the system during service, replacement of fittings, or repairs. It is not recommended for smooth flow regulation; keep the valve fully open or fully closed.

Main Features

• Connection thread 3/4"
• Nominal pressure 25 bar
• Brass body
• Version with compression nut
• Set includes two handles: blue and red
• For water and central heating circuits in buildings

Technical Data

Application and Installation

The valve is classified as an accessory for manifolds. It is suitable for water supply and central heating circuits in buildings where individual branches need to be closed. Choose the version with a 3/4" thread according to the size of the pipe and fittings to which the valve will be connected.

Install the valve with a 3/4" connection thread in a location that is easily accessible for operation. When sealing the thread, use material suitable for water and heating systems and avoid over-tightening. After installation, slowly pressurize the system and check all connections.

Frequently Asked Questions

What connection thread does this valve have?

The connection thread has a size of 3/4".

For which systems is the valve suitable?

It is intended for water supply and central heating systems in buildings.

What material is the valve made of?

The valve is made of brass.