Brass cap 3/8"
Code: 25200558Related products
Product detailed description
Brass cap 3/8" - for internal thread
- used for blinding pipes or fittings with an external connection thread in drinking water, service water, central heating or underfloor heating pipe systems with an operating pressure of up to 1.5 MPa and temperature up to 110°C,
- can also be used for liquids whose properties do not damage the base material from which the cap is made and do not exceed the temperature and pressure conditions established for water
Frequently Asked Questions
- How do I choose the correct fitting size? The thread size (e.g. 1/2", 3/4", 1") must exactly match the thread size on the pipe or fitting you are connecting to - designations such as FF (female-female), MF (male-female) and similar abbreviations in the name indicate the thread type on each side of the fitting.
- What do the abbreviations FF and MF in the name mean? F (female thread) and M (male thread) indicate the thread type on the given side of the fitting - for example "FF" means female thread on both sides, "MF" means male on one side and female on the other.
- Do I need to use sealing material during installation? Yes, sealing material (e.g. PTFE tape or hemp fibre with sealing paste) is standardly used on threaded joints to ensure a perfectly tight connection - a thread alone without sealing will not reliably seal.
- Must installation be carried out by a professional? A simple threaded connection can be handled by a skilled DIYer, but for work on an already functioning system (especially gas or pressurised water/heating systems) we recommend calling in a plumber, who will also verify the tightness of the joint after installation.
- What material and pressure class does this fitting have? It is made of brass, suitable for standard water and heating pipework - exact nominal pressure and temperature values (where stated for a specific product) can be found in the technical parameters above.
Additional parameters
| Category: | Caps |
|---|---|
| Warranty: | 2 years |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!
IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.
Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.
Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.
“Made in Italy” adds value
IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.
The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.
Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.
The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.
As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.