BW Set of submersible pump 4SD 3/10 + Press Basic Vertikal

Product detailed description

The submersible pump set Press Basic Vertikal with 4SD | 3/10 | 0.55 kW, 5/4" forms an unbeatable package for households, gardens and industrial purposes – it combines a high-performance submersible pump with a complete pressure installation kit. The system was designed for reliable water flow and constant pressure with the simplest possible installation.

What the set includes

• Submersible multistage pump 4SD 3/10
  • Power: 0.55 kW, 5/4″ connection, built-in 20 m cable. Stainless steel hydraulics, brass suction and discharge bodies, 10 impellers made of noryl. Optimal flow rate approx. 3 m³/h at a head of ~53 m, maximum head up to approximately 70 m. Can be used with water temperature up to 35 °C, with sand tolerance up to 0.25%.
• Installation set Set Press 1″ Basic Vertikal
  • Vertical flow unit with 1″ inlet, 230 V power supply, 1.1 kW output.
  • Includes:
    • 2 l pressure diaphragm tank, robust long-life membrane,
    • brass ball valve 1″ + fittings,
    • plastic T-piece and plastic fittings, plastic DN32 couplings, flexible hoses terminated with a plug.

Advantages of this set

• Complete solution – pump + pressure installation, all in one package
• High delivery head – suitable for deep wells or large houses
• 2 l pressure tank helps maintain stable pressure and reduce pump switching frequency
• Materials: stainless steel, brass and plastic – corrosion resistance and long service life
• Vertical assembly of the set – saves space, makes installation easier
• Use: garden irrigation, domestic water systems, pressure boosting, water supply from a well, industrial use

When to use this set

• If you need a reliable solution for pumping water from a well, tank or reservoir where a higher delivery head is required
• For houses with a more distant water source, where it is necessary to maintain pressure in the system
• For garden irrigation, water transfer, domestic water, or where stable pressure is needed for smaller to medium consumption

Installation recommendations

• Includes the necessary installation set, however during installation make sure the water is clean (use a filter if necessary)
• Install according to the installation conditions – vertical positioning, ensure a solid suspension point for the submersible part
• Maintain the minimum pipe diameters for safe flow (e.g. DN32 / 1″ as in the set)
• Check regularly, especially when pumping water containing sand: the pump may require additional protection / servicing

This complete set is the ideal choice for anyone who prefers a ready-made kit without the need to add further parts. The submersible pump and the Basic Vertikal pressure set create a reliable system with easy installation and a long service life. An additional benefit is the space-saving vertical arrangement, which frees up space and simplifies servicing.

PUMP TECHNICAL PARAMETERS

• Max. temperature of pumped water - 35 °C
• Max. sand content in water - 0.25%
• Min. internal borehole diameter - 100 mm
• Pump length - 801 mm
• Pump diameter - 96 mm
• Power - 0.55kW
• Voltage - 230V
• Max. flow rate - 4.8 m³/h
• Optimal flow rate - 3 m³/h | 50 l/min
• Optimal head - 53 m
• Max. head - 72 m
• Discharge thread diameter - 5/4"
• Cable length - 20m

Performance and efficiency curve of the 4SD 3/10 pump