Apartment module for domestic hot water IVAR.M-SAT – thermostatic element, switching 2 to 8 s

Code: 506369
Not rated Rating details
1 185,72 € –20 %
Bytový modul na prípravu teplej vody IVAR.M-SAT – termostatický člen, prepnutie 2 až 8 s
1 185,72 € –20 % 948,58 € / pcs 771,20 € excl. VAT Measure price:
International delivery
To order (1-2 weeks)

Detailed information

Product detailed description

The apartment module for domestic hot water IVAR.M-SAT (506369) is a mechanical compact module for instant hot-water preparation. It needs no electricity: when hot water is called for, a liquid-filled mechanical regulator opens the three-way valve and the thermostatic mixing valve sets the temperature you choose.

How the module works

The module has two modes: hot-water preparation and heating. When hot water is called for, the heat-carrying liquid is diverted to the primary side of the plate heat exchanger; without a call it returns to heating. The drawback of the mechanical solution is slower switching between the modes, 2 to 8 seconds.

Manufacturer data

  • heating circuit: PN 10, up to +95 °C, maximum differential pressure at the end points 0.6 bar
  • hot-water circuit: PN 10, up to +90 °C, plate heat exchanger with 40 AISI 316 stainless steel plates, water volume 0.5 l
  • thermostatic mixing valve: setting range +36 to +65 °C, minimum flow at the flow sensor ON 2.3 l/min, OFF 1.5 l/min
  • minimum boiler temperature for full heating output 55 °C
  • connection: 3/4" male thread for a flat gasket
  • included: mounting base, three-way valve, two static balancing valves and thermal insulation

Installation tips

The manufacturer recommends fitting a check valve on the cold-water supply and an ON/OFF shut-off on the heating side, so that the radiators do not warm up outside the heating season. Have the installation done by a qualified contractor.

Technical data

Code506369
ManufacturerIVAR
TypeIVAR.M-SAT
Product kindmechanical apartment module with a thermostatic mixing valve
Heating circuitPN 10, +95 °C
Hot-water circuitPN 10, +90 °C
Mixing valve+36 … +65 °C
Switching time2 – 8 s
Heat exchanger40 plates, AISI 316 stainless steel, 0.5 l
Connection3/4" male thread, flat gasket
Min. boiler temperature55 °C
Power supplyno electricity needed
Materialbrass CW617N, semi-hard copper pipes, galvanised sheet frame

Frequently asked questions

Does the IVAR.M-SAT module need electrical power?
No, it is a mechanical module with no electrical supply. The drawback is slower switching between the modes, 2 to 8 seconds.

What temperature range does the mixing valve have?
The hot-water temperature can be set from +36 to +65 °C.

What should be added during installation?
According to the data sheet a check valve on the cold-water supply and an ON/OFF shut-off on the heating side are recommended.

Additional parameters

Category: IVAR.SAT apartment stations
Warranty: 2 years
Code: 506369
Manufacturer: IVAR
Type: IVAR.M-SAT
Product kind: mechanical apartment module with a thermostatic mixing valve
Heating circuit: PN 10, +95 °C
Hot-water circuit: PN 10, +90 °C
Mixing valve: +36 … +65 °C
Switching time: 2 – 8 s
Heat exchanger: 40 plates, AISI 316 stainless steel, 0.5 l
Connection: 3/4" male thread, flat gasket
Min. boiler temperature: 55 °C
Power supply: no electricity needed
Material: brass CW617N, semi-hard copper pipes, galvanised sheet frame

Product rating

Be the first who will post an article to this item!

Do not fill out this field

How would you rate this product? Choose 1 to 5 stars, where 1 is the worst and 5 is the best rating.

Discussion

Be the first who will post an article to this item!

Do not fill out this field

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

“Made in Italy” adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.