DAB NKVE 3/06 S 005 M pump with MCE11/P frequency inverter, 0.55 kW motor, AISI 304 stainless steel
Code: 60206469Product detailed description
DAB NKVE 3/06 S 005 M (code 60206469) belongs to the NKVE range: a vertical multistage pump made of AISI 304 stainless steel with an MCE11/P frequency inverter mounted on the motor. The inverter changes the speed according to the pressure sensor signal and holds a steady pressure in the network, so the pump suits domestic and commercial pressure boosting, irrigation and water circulation in heating and air-conditioning systems. The value 3 in the designation is the nominal flow in m³/h, while the number after the slash (6) relates to the number of stages.
This version in detail
- motor 0.55 kW, IP55 enclosure, insulation class F, IE3 efficiency, motor flange B14
- MCE11/P inverter: 1 × 230 V supply, 3 × 230 V output to the pump, maximum motor current 6.5 A (minimum 1.0 A)
- the set is supplied with a pressure sensor as standard; a flow sensor is optional and allows more precise pressure setting
- control range 1–24 bar depending on the sensor; protection against dry running, overvoltage, overcurrent and overheating
Operating conditions
- clean, thin, non-aggressive liquid without solid or abrasive particles; glycol content up to 30 %
- liquid temperature −30 to +120 °C with EPDM (−15 to +120 °C with Viton/FKM), ambient temperature up to +50 °C
- maximum operating pressure 25 bar
- vertical installation only
The inverter is cooled by air from the motor fan. The electrical connection and the inverter setup must be carried out by a specialist.
Technical data
| Code | 60206469 |
| Manufacturer | DAB |
| Type | DAB.NKVE |
| Model | NKVE 3/06 S 005 M |
| Kind | vertical multistage pump with frequency inverter |
| Nominal flow | 3 m³/h |
| Motor power | 0.55 kW |
| Frequency inverter | MCE11/P |
| Inverter supply | 1 × 230 V, 50 Hz |
| Voltage to the pump | 3 × 230 V |
| Max. motor current | 6.5 A |
| Material of wetted parts | AISI 304 stainless steel |
| Enclosure / insulation class | IP55 / F |
| Liquid temperature | −30…+120 °C (EPDM) |
| Max. operating pressure | 25 bar |
Frequently asked questions
What power supply does the NKVE 3/06 S 005 M pump need?
The MCE11/P inverter connects to a single-phase 1 × 230 V supply and creates three-phase 3 × 230 V for the pump motor. The maximum motor current is 6.5 A.
Is a pressure sensor included in the set?
According to the manufacturer's description the set is supplied with a pressure sensor as standard. A flow sensor is optional and serves for more precise pressure setting.
Can several pumps be connected in one group?
Yes, MCE/P inverters allow a group of up to 8 pumps linked by a cable. The pumps then alternate in operation.
Additional parameters
| Category: | DAB.NKV - vertical multistage pumps (1-20) |
|---|---|
| Warranty: | 2 years |
| Code: | 60206469 |
| Manufacturer: | DAB |
| Type: | DAB.NKVE |
| Model: | NKVE 3/06 S 005 M |
| Kind: | vertical multistage pump with frequency inverter |
| Nominal flow: | 3 m³/h |
| Motor power: | 0.55 kW |
| Frequency inverter: | MCE11/P |
| Inverter supply: | 1 × 230 V, 50 Hz |
| Voltage to the pump: | 3 × 230 V |
| Max. motor current: | 6.5 A |
| Material of wetted parts: | AISI 304 stainless steel |
| Enclosure / insulation class: | IP55 / F |
| Liquid temperature: | −30…+120 °C (EPDM) |
| Max. operating pressure: | 25 bar |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!
