Circulation pump OHI CO 25-40/180 for heating and hot water

Product detailed description

The circulation pump Panda 25-60/130 has 4 operating modes. The motor with permanent magnets ensures low energy consumption. The PANDA circulation pump has a motor with permanent magnets and an electronic differential pressure regulator, which independently adjusts the performance to the actual needs of the installation. The control panel with a display of current energy consumption makes it easier to monitor the device operation, and the set of slip-on nuts with an adapter allows the PANDA pump to be mounted without the need to purchase additional accessories. The pump ensures quiet and energy-efficient operation. Shaft / threaded connection diameter: 1½" / 1" Quick installation thanks to the slip-on nuts and adapter included in the set, without the need to remove additional couplings. Automatic performance regulation in the AUTO mode limits energy consumption without the need for manual adjustment. Constant speed modes HS1–HS3 allow maintaining repeatable operating parameters during selected hours. The 230 V power supply of the PANDA circulation pump allows connection to a standard household socket. **Advantages of the Panda 25-60/130 circulation pump** The differential pressure regulator in the PANDA pump operates in four modes: AUTO, in which the proportional pressure characteristic automatically adapts to the variable needs of the installation, and HS1, HS2 and HS3, i.e., constant speed curves, which are useful under stable operating conditions. The motor with permanent magnets ensures low energy consumption even at the lowest setting, and the control panel mounted on the side of the motor makes it easier to change the mode without the need to remove the cover. The versions 25-60/180 and 25-60/130 differ in the spacing of the connecting flanges, allowing the pump to be adapted to an existing installation without replacing part of the piping. **Technical parameters:** **Power supply:** 1×230V, 50Hz **Operating modes:** 4 (AUTO, HS1, HS2, HS3) **Protection class:** IP44 **Insulation class:** F **Medium temperature:** 2–95 °C **Ambient temperature:** 0–40 °C **Maximum pressure in the pipe:** 10 Bar **Flange spacing:** 130 mm **Noise level:** 43 dB(A) **Application of the Panda 25-60/130 circulation pump** Circulation of heating medium in central heating systems in households, circulation of clean technical water Heating system with constant temperature and variable flow. Heating system with variable pipe temperature. Floor and radiator heating, including operation in night mode. Air conditioning system. Industrial circulation system. For heating systems with night mode, in which constant speeds HS1–HS3 allow maintaining predictable operating parameters during selected hours of the day. **Package includes** Panda 25-60/130 pump 2x gasket