CITEL DS240S-280DC type 2 surge protector for photovoltaics, 2-pole, 280 V DC, DIN rail
Code: OST_800187Product detailed description
Protecting PV panels and the inverter against overvoltage
A surge protector is standard equipment in both smaller and larger photovoltaic installations. When lightning strikes, it diverts the discharge energy to the earthing terminal and thus protects other equipment – the inverter or charge controller – as well as their users.
The CITEL DS240S-280DC is a two-channel model: within the width of a single module (18 mm) it protects both conductors from the PV panels, saving space in the distribution board. The nominal discharge current is 20 kA per pole, the maximum 40 kA.
Design and connection
- varistors with thermal fuse and thermal disconnector
- protection against both differential and common-mode overvoltage
- optical fault indication on the device and a contact for remote status signalling
- modular design – base unit and replaceable module for quick replacement
- mounting on a 35 mm DIN rail, terminals for conductors up to 25 mm² (solid) and 10 mm² (flexible)
- complies with IEC 61643-1 and EN 61643-11
Frequently asked questions
Which PV string voltage is the protector intended for?
The nominal DC voltage is 280 V and the maximum continuous operating voltage is 350 V DC. The open-circuit voltage of your string should not exceed this value.
Does the whole protector have to be replaced after a fault?
No, thanks to the modular design it is enough to replace the plug-in module; the base unit stays in the board.
Technical parameters
| Brand | CITEL |
| Manufacturer | CITEL |
| Order number | 310511 |
| EAN | 3309450015020 |
| Device type | type 2 surge protector (T2) |
| Network type | DC |
| Number of poles | 2 |
| Nominal discharge current In (8/20) | 20 kA |
| Maximum discharge current Imax | 40 kA |
| Nominal DC voltage | 280 V |
| Max. continuous DC voltage | 350 V |
| Max. continuous AC voltage | 275 V |
| Protection level Up | 1 kV |
| Short-circuit withstand | yes |
| Signalling | optical + remote contact |
| Mounting | 35 mm DIN rail, 1 module |
| Protection rating | IP20 |
| Standards | IEC 61643-1, EN 61643-11 |
| Dimensions (H × W × D) | 99 × 18 × 67 mm |
| Weight | 0.14 kg |
Additional parameters
| Category: | Photovoltaics |
|---|---|
| Warranty: | 2 years |
| Weight: | 0.14 kg |
| EAN: | 3309450015020 |
| Brand: | CITEL |
| Manufacturer: | CITEL |
| Order number: | 310511 |
| EAN: | 3309450015020 |
| Device type: | type 2 surge protector (T2) |
| Network type: | DC |
| Number of poles: | 2 |
| Nominal discharge current In (8/20): | 20 kA |
| Maximum discharge current Imax: | 40 kA |
| Nominal DC voltage: | 280 V |
| Max. continuous DC voltage: | 350 V |
| Max. continuous AC voltage: | 275 V |
| Protection level Up: | 1 kV |
| Short-circuit withstand: | yes |
| Signalling: | optical + remote contact |
| Mounting: | 35 mm DIN rail, 1 module |
| Protection rating: | IP20 |
| Standards: | IEC 61643-1, EN 61643-11 |
| Dimensions (H × W × D): | 99 × 18 × 67 mm |
| Weight: | 0.14 kg |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!
