CITEL DS50VGPVS-500 Type 2 surge arrester for solar PV 500 V DC with spark gap and remote signalling
Code: OST_800202Product detailed description
VG technology arrester for PV arrays up to 500 V DC
The CITEL DS50VGPV series was developed specifically to protect photovoltaic equipment against lightning currents and surges and is made for operating voltages of 500 and 1000 V DC. The DS50VGPVS-500 is a two-part Type 2 arrester for DIN rail mounting, intended for arrays with a rated voltage of 500 V DC.
VG protection combines a gas-filled spark gap (GSG) with high-energy varistors connected in a Y configuration. As a result, no leakage or operating currents flow through the arrester that would gradually wear it out – its service life is considerably longer and the insulation resistance of the PV array can be measured without errors.
Thanks to galvanic isolation, the arrester is also suitable for installations with thin-film (amorphous) panels. Per pole it handles a nominal discharge current of 15 kA and a maximum of 40 kA.
Design and connection
- two-part design – base and replaceable protection module, changed without disconnecting the wires
- double-protected disconnection device
- Y circuit tolerant of wiring faults and reverse polarity
- no backup fuse required
- remote status signalling included as standard
- complies with IEC 61643-1 and EN 61643-11
Frequently asked questions
Does the arrester interfere with insulation resistance measurement?
No. The circuit with a gas-filled spark gap allows the insulation resistance of the PV array to be measured without distortion.
Can it be used with thin-film panels?
Yes, thanks to galvanic isolation it is also suitable for amorphous panels.
What should I do when the protection trips?
Simply replace the protection module – the wires stay connected to the base.
Technical specifications
| Brand | CITEL |
| Manufacturer | CITEL |
| EAN | 3309450010544 |
| Device type | Type 2 (T2) surge arrester |
| Protection technology | VG – gas-filled spark gap + Y-connected varistors |
| Network type | DC (photovoltaics) |
| Rated voltage | 500 V DC |
| Nominal discharge current In (per pole) | 15 kA |
| Maximum discharge current Imax (per pole) | 40 kA |
| Galvanic isolation | yes |
| Backup fuse | not required |
| Signalling | remote, standard |
| Mounting | DIN rail, replaceable module |
| Standards | IEC 61643-1, EN 61643-11 |
| Dimensions (H × W × D) | 99 × 54 × 80 mm |
| Weight | 0.227 kg |
| Warranty | 10 years |
Additional parameters
| Category: | Photovoltaics |
|---|---|
| Warranty: | 2 years |
| Weight: | 0.227 kg |
| EAN: | 3309450010544 |
| Brand: | CITEL |
| Manufacturer: | CITEL |
| EAN: | 3309450010544 |
| Device type: | Type 2 (T2) surge arrester |
| Protection technology: | VG – gas-filled spark gap + Y-connected varistors |
| Network type: | DC (photovoltaics) |
| Rated voltage: | 500 V DC |
| Nominal discharge current In (per pole): | 15 kA |
| Maximum discharge current Imax (per pole): | 40 kA |
| Galvanic isolation: | yes |
| Backup fuse: | not required |
| Signalling: | remote, standard |
| Mounting: | DIN rail, replaceable module |
| Standards: | IEC 61643-1, EN 61643-11 |
| Dimensions (H × W × D): | 99 × 54 × 80 mm |
| Weight: | 0.227 kg |
| Warranty: | 10 years |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!
