Dry-rotor flanged in-line pump DAB CM2 32-450 T (60209861)

Code: 60209861
Not rated Rating details
664,36 € –20 %
CM2 32-450 T suchobežné čerpadlo - jednotlivé prírubové
664,36 € –20 % 531,49 € / pcs 432,11 € excl. VAT Measure price:
International delivery
To order (1-2 weeks)

Detailed information

Product detailed description

Pump 60209861 (CM2 32-450 T) has its suction and discharge ports in one axis and PN 10 or PN 16 flanges with threaded ports for test gauges. The pump body and adapter are cast iron, the impeller is cast iron or technopolymer depending on the type, and the motor shaft is stainless steel. The mechanical seal is silicon carbide with EPDM O-rings.

Technical data

  • Series: CM2
  • Nominal size DN: 32
  • Max. head from type designation: 4.5 m
  • Motor: three-phase, 4-pole, air-cooled, 3 × 230 / 400 V, 50 Hz
  • Medium temperature: −15 °C … +140 °C
  • Ambient temperature: max. +50 °C
  • Max. pressure: 16 bar (PN 10 / PN 16)
  • Body material: grey cast iron EN GJL250
  • Mechanical seal: SiC / SiC, EPDM
  • Protection / insulation class: IP 55 / F
  • Medium: clean liquid without solids or abrasives, glycol 50 % at most

The pumped liquid should be clean, free of solid particles, non-viscous and non-aggressive; the glycol content may be 50 % at most. The pump is installed permanently in a horizontal or vertical position with the motor on top. The letter T in the designation means a three-phase motor. Electrical protection of the motor must be provided by the user; installation and connection should be left to a qualified company.

Technical data

Code60209861
ManufacturerDAB
TypeDAB.CM2
SeriesCM2
Nominal size DN32
Max. head from type designation4.5 m
Motorthree-phase, 4-pole, air-cooled, 3 × 230 / 400 V, 50 Hz
Medium temperature−15 °C … +140 °C
Ambient temperaturemax. +50 °C
Max. pressure16 bar (PN 10 / PN 16)
Body materialgrey cast iron EN GJL250
Mechanical sealSiC / SiC, EPDM
Protection / insulation classIP 55 / F
Mediumclean liquid without solids or abrasives, glycol 50 % at most

Frequently asked questions

Does the pump include motor protection?
No. The manufacturer states that the user must provide electrical protection for the motor.

In which position is the pump installed?
Permanently, horizontal or vertical, with the motor on top. Motors from 7.5 kW upwards are installed vertically only.

Can water with glycol be pumped?
Yes, the glycol content may be up to 50 % and the liquid temperature −15 to +140 °C.

Additional parameters

Category: DAB.CM,CM-G,DCM,DCM-G - Dry-Rotor Pumps, 4-Pole
Warranty: 24
Code: 60209861
Manufacturer: DAB
Type: DAB.CM2
Series: CM2
Nominal size DN: 32
Max. head from type designation: 4.5 m
Motor: three-phase, 4-pole, air-cooled, 3 × 230 / 400 V, 50 Hz
Medium temperature: −15 °C … +140 °C
Ambient temperature: max. +50 °C
Max. pressure: 16 bar (PN 10 / PN 16)
Body material: grey cast iron EN GJL250
Mechanical seal: SiC / SiC, EPDM
Protection / insulation class: IP 55 / F
Medium: clean liquid without solids or abrasives, glycol 50 % at most

Product rating

Be the first who will post an article to this item!

Do not fill out this field

How would you rate this product? Choose 1 to 5 stars, where 1 is the worst and 5 is the best rating.

Discussion

Be the first who will post an article to this item!

Do not fill out this field
Vytvořil Shoptet | Design Shoptak.cz.