TECOFIX cold and hot water manifold, 3-way, DN 10, FASTEC Quick F 13 – IVAR.TECOFIX CK2 – SALE
Code: CK023F10100Related products
Product detailed description
The TECOFIX 3-way cold and hot water manifold, code CK023F10100 (type IVAR.TECOFIX CK2), splits the water supply into 3 separate circuits, for example to individual draw-off points. Its nominal size is DN 10, and pipes are connected with the FASTEC Quick system, connection size F 13.
Features
- 3-way design: 3 outlets for connecting the circuits
- nominal pressure PN 16, maximum temperature +95 °C
- for ALPEX and PEX pipes
- FASTEC Quick F 13 connection size
- material brass, EPDM O-ring
- outlets without shut-off valves
Installation and TECOFIX accessories
For mounting TECOFIX manifolds, the TXA01 installation plate (240 x 80 mm) for wall fixing, the TXA02 installation plate with flush-mounted box (310 x 210 x 85 mm) and the TECOFIX TX001 and TX002 installation clamps are available. They are ordered separately.
If you need to shut off individual circuits, choose the 3-way IVAR.TECOFIX CK3 manifold with ball valves on the outlets (code CK033F10100). We recommend leaving the connection to the water supply to a plumber.
Technical data
| Code | CK023F10100 |
| Manufacturer | IVAR |
| Type | IVAR.TECOFIX CK2 |
| Product type | cold and hot water manifold |
| System | TECOFIX |
| Number of ways (outlets) | 3 |
| Valves on outlets | none |
| Nominal size | DN 10 |
| Nominal pressure | PN 16 |
| Max. temperature | +95 °C |
| Connection | FASTEC Quick, F 13 |
| Suitable pipes | ALPEX, PEX |
| Material | brass, EPDM O-ring |
Frequently asked questions
Which pipes is the 3-way TECOFIX manifold designed for?
For ALPEX and PEX pipes. It is connected with the FASTEC Quick system, connection size F 13.
Can the manifold also be used for hot water?
Yes, it is intended for both cold and hot water. The nominal pressure is PN 16 and the maximum temperature +95 °C.
Can the individual outlets be shut off?
Type IVAR.TECOFIX CK2 has no valves on the outlets. To shut off circuits separately, use the 3-way IVAR.TECOFIX CK3 manifold with ball valves (code CK033F10100).
What do I need to fix the manifold in place?
For TECOFIX manifolds, the TXA01 wall installation plate, the TXA02 plate with flush-mounted box and the TECOFIX TX001 and TX002 installation clamps are available. They are ordered separately.
Additional parameters
| Category: | cold and hot water manifolds |
|---|---|
| Warranty: | 24 |
| Availability: | In stock or at supplier |
| Code: | CK023F10100 |
| Manufacturer: | IVAR |
| Type: | IVAR.TECOFIX CK2 |
| Product type: | cold and hot water manifold |
| System: | TECOFIX |
| Number of ways (outlets): | 3 |
| Valves on outlets: | none |
| Nominal size: | DN 10 |
| Nominal pressure: | PN 16 |
| Max. temperature: | +95 °C |
| Connection: | FASTEC Quick, F 13 |
| Suitable pipes: | ALPEX, PEX |
| Material: | brass, EPDM O-ring |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!
IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.
Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.
Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.
“Made in Italy” adds value
IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.
The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.
Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.
The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.
As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.