Complete Kit PNI AP800C for Self-Supporting Gate, 6 m Rack, 800 kg

Product detailed description

PNI AP800C is a robust automation kit designed for heavy-duty self-supporting (console) sliding gates. It is designed for high-intensity environments and combines a powerful drive with safety features that enhance comfort and protection during daily use of the entrance. The kit is delivered as a complete, ready-to-install package including a 6 m gear rack.

Technical specifications

For larger installations, the counterweight, i.e., the rear part of the gate, should correspond to a 1:3 ratio relative to the opening. For example, an opening of 7.5 m requires a counterweight of 2.5 m.

Key features

• control with included remote controls and compatibility with external accessories: push buttons, access control keypads and RFID readers
• adjustable obstacle detection with two sensitivity levels (high and low)
• programmable automatic closing after 10, 30 or 60 seconds
• „Condominium“ mode for multiple users

Safety and „Condominium“ mode

If the gate hits an object while opening or closing, the motor stops immediately to prevent damage or injury. „Condominium“ mode is suitable for shared residential complexes or busy commercial areas. During opening, commands from other remotes are ignored until the gate is fully open, preventing mechanical stress. If a remote is pressed during closing, the gate stops immediately and returns to the fully open position, ensuring safe access.

Package contents

• 1 x 350 W motor with high torque
• 1 x warning flashing light
• 2 x safety photoeyes (infrared sensors)
• 6 m durable gear rack
• 1 x professional wheel kit for self-supporting systems
• 1 x complete mounting material and accessories

Important installation instructions

To protect the sensitive electronics and mechanical integrity of the system, follow these rules:

• Do not weld while the gate is resting on the wheel kits, as an electric arc can damage the bearings.
• Do not weld even after the motor is installed, as an electric spark will destroy the control board and internal wiring.

Frequently asked questions

For which opening is the kit optimized?

For an opening of 4.5 m with a counterweight of 1.5 m. For larger gates, the 1:3 ratio is maintained, for example 7.5 m opening and 2.5 m counterweight.

What does „Condominium“ mode do?

During opening, it ignores commands from other remotes until the gate is fully open and during closing, it returns the gate to the fully open position if a remote is pressed.

Can I weld after installation?

No. Welding on a gate with mounted wheels or with an installed motor can damage the bearings, control board and wiring.