Connection fittings IVAR.TER-PS for ATHENA STANDARD outdoor unit – 2× 1" F × Cu 28 mm
Code: IHP086U567ASRelated products
Product detailed description
Use
The IVAR.TER-PS compression fittings are used to connect the heating system and hot water circuit pipework to the connections that come out of the heat pump casing. This set is intended for the ATHENA STANDARD outdoor unit and contains two adapters from 1" female thread to 28 mm diameter copper pipe.
Design and material
- three-part compression joint: body, olive and nut
- body in brass CW617N, nut in brass CW614N, olive in brass CW603N
- nut thread for Ø 28 mm pipe: W1"3/8-14
- fittings comply with UNI EN 1254-2 for compression-ended fittings for copper tubes, threads with UNI EN ISO 10226-1
Operating limits
The maximum operating temperature is +120 °C, the minimum working temperature −20 °C and the maximum working pressure 16 bar.
For the ATHENA TOTAL outdoor and indoor unit, the range includes a separate set IHP086U567AH with more adapters and couplings.
Technical data
| Code | IHP086U567AS |
| Brand | IVAR |
| Type | IVAR.TER-PS |
| Product type | compression connection fittings (set) |
| Application | ATHENA STANDARD heat pump outdoor unit |
| Set contents | 2× adapter to copper pipe 1" F × 28 mm |
| Body material | brass CW617N |
| Nut material | brass CW614N |
| Olive material | brass CW603N |
| Max. operating temperature | +120 °C |
| Min. working temperature | −20 °C |
| Max. working pressure | 16 bar |
Frequently asked questions
What does the ATHENA STANDARD set contain?
Two brass compression adapters from 1" female thread to 28 mm diameter copper pipe.
What are the fittings used for?
They connect the copper pipes of the heating system and hot water circuit to the connections coming out of the heat pump casing. The joint consists of a body, an olive and a nut.
Is this set also suitable for ATHENA TOTAL?
No, the ATHENA TOTAL outdoor and indoor unit uses set IHP086U567AH, which contains more adapters as well as couplings for copper pipe.
Up to what pressure and temperature can they be used?
Up to a maximum working pressure of 16 bar and an operating temperature of +120 °C; the minimum working temperature is −20 °C.
Additional parameters
| Category: | accessories for IVAR.HP ATHENA heat pump series |
|---|---|
| Warranty: | 24 |
| Availability: | In stock or at supplier |
| Code: | IHP086U567AS |
| Brand: | IVAR |
| Type: | IVAR.TER-PS |
| Product type: | compression connection fittings (set) |
| Application: | ATHENA STANDARD heat pump outdoor unit |
| Set contents: | 2× adapter to copper pipe 1" F × 28 mm |
| Body material: | brass CW617N |
| Nut material: | brass CW614N |
| Olive material: | brass CW603N |
| Max. operating temperature: | +120 °C |
| Min. working temperature: | −20 °C |
| Max. working pressure: | 16 bar |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!
IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.
Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.
Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.
“Made in Italy” adds value
IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.
The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.
Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.
The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.
As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.