Copper heating insert IVAR.SR5 for IVAR.TANKS tanks – flange Ø 290 mm (DN 200), L = 750 mm, 4.54 m²
Code: 4000611Product detailed description
Flanged Heat Exchanger for Hot Water Heating
IVAR.SR5 is a spiral heating insert made of copper tube with external finning, which is inserted into the tank through a flanged opening. The SR version is tinned, so it is intended for heating hot water for human consumption; the non-tinned series IVAR.SA is used for heating water. The heat exchanger area of 4.54 m² at a length of 750 mm fits into water heaters and storage tanks with a flange of Ø 290 mm.
What is included
- perforated flange, flange cover and screws
- heating medium connection 1"
- dielectric insulation kit IVAR.KIT 500-5 (code 4000699), which electrically separates copper from the steel flange and from the piping
- weight 23.4 kg
What to pay attention to during installation
The length of the insert must be at least 10 cm shorter than the diameter of the tank. When inserting, place a plastic pad under the insert so that the copper does not damage the surface treatment of the flange, and then remove the pad. The plastic threaded couplings at the ends of the insert must not be removed, and the supply and return piping must be securely fastened before connecting. The tank must be grounded regardless of whether it contains an electric element.
Technical parameters
| Code | 4000611 |
| Manufacturer | IVAR |
| Type | IVAR.SR5 |
| Material | copper, tinned, with external finning |
| Heat exchange area | 4.54 m² |
| Length L | 750 mm |
| Flange | Ø 290 mm (DN 200) |
| Connection | 1" |
| Weight | 23.4 kg |
| Dielectric kit | IVAR.KIT 500-5 (4000699) |
| Purpose | heating hot water for human consumption |
Frequently asked questions
What is the difference between IVAR.SR and IVAR.SA inserts?
IVAR.SR inserts are tinned and intended for heating hot water for human consumption. Non-tinned IVAR.SA inserts are used for heating heating water.
Into which tank does the IVAR.SR5 insert fit?
A flange of Ø 290 mm (DN 200) is required. The insert must be at least 10 cm shorter than the diameter of the tank, so with a length of 750 mm, the tank must have a diameter of at least 850 mm.
What is the dielectric kit for and is it included in the packaging?
The IVAR.KIT 500-5 kit electrically separates the copper insert from the steel flange and piping, thus protecting the tank from corrosion. According to the technical sheet, it is part of the insert; its plastic couplings must not be removed.
Additional parameters
| Category: | heating inserts for tanks |
|---|---|
| Warranty: | 2 years |
| Weight: | 23.4 kg |
| Availability: | In stock or at supplier |
| Code: | 4000611 |
| Manufacturer: | IVAR |
| Type: | IVAR.SR5 |
| Material: | copper, tinned, externally finned |
| Heat transfer surface: | 4.54 m² |
| Length L: | 750 mm |
| Flange: | Ø 290 mm (DN 200) |
| Connection: | 1" |
| Weight: | 23.4 kg |
| Dielectric kit: | IVAR.KIT 500-5 (4000699) |
| Purpose: | heating water for human consumption |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!
IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.
Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.
Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.
“Made in Italy” adds value
IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.
The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.
Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.
The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.
As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.