DAB 3 ESYBOX MAX 60/120 T – electronic pressure station with three pumps, 3× 380–480 V – SPECIAL OFFER

Product detailed description

DAB 3 ESYBOX MAX 60/120 T (code 60199035T) consists of three electronic pumping units ESYBOX MAX 60/120 T mounted on a triple connection base. The station increases water pressure in medium and large residential buildings, commercial properties and high-rise buildings, according to the manufacturer, even over 14 floors. It is modular, so individual parts can be transported and assembled at the installation site. Quiet operation and compact dimensions allow placement even in living areas.

Operating principle

Each unit is a vertical multi-stage pump with its own frequency converter, display, pressure sensors on suction and discharge, a check valve on discharge and an integrated expansion tank. The electronics adjusts the motor speed according to the current consumption and maintains the pressure in the system at the set value in the range of 1–12 bar (factory setting 3 bar). Once the first pump is configured, the other units in the group synchronize automatically. According to the manufacturer's curve, the assembly delivers a head of 53 m at a flow rate of 25.2 m³/h.

Construction

• in each unit 3 impellers made of technopolymer with steel rings against wear, body made of technopolymer with a steel casing
• water-cooled motor with permanent magnets, motor casing made of stainless steel, shaft made of AISI 303 steel
• motor protection IP X5, insulation class F
• suction and discharge connections of the assembly 2"
• certifications WRAS, ACS and NSF61

Control and protection

Parameters are set on the large display of the pump or in the DConnect app – the units have built-in Wi-Fi and Bluetooth. The DSync function automatically sets the language, time and measurement units of the country of installation when the phone is connected. The electronics protects the pumps against dry running, overload, incorrect voltage, overheating, freezing, blocking and too frequent switching. An expansion module esy I/O is used for connection to the building management system (BMS).

Installation and operation

The station is installed fixed in a vertical position. It pumps clean, chemically neutral water without solid and abrasive particles with a temperature up to 50 °C, the ambient temperature may be up to 55 °C and the inlet pressure up to 5 bar. According to IVAR, the complete assembly (version T) also includes a control panel and a mounting bracket; for three units of the three-phase version, the panel E3G10.5 T 400V is intended. The electrical connection must be performed by a qualified person.

Technical parameters

Frequently asked questions

What does the 3 ESYBOX MAX 60/120 T assembly include?
Three pumping units ESYBOX MAX 60/120 T and a triple connection base with 2" connections. According to IVAR, the complete assembly (version T) also includes a control panel and a mounting bracket.

What kind of water is the station intended for?
For clean, chemically neutral water without solid or abrasive particles and without crystallization with a temperature up to 50 °C. The inlet pressure may be up to 5 bar, the suction height with a check valve up to 4 m.

Can the station be controlled remotely?
Yes, the units have built-in Wi-Fi and Bluetooth and connect to the DConnect app. With an active DConnect service and internet connection, it is possible to change the pressure remotely, monitor alarms and consumption.

What electrical power does the station require?
Each of the three units is powered three-phase 3× 380–480 V, 50/60 Hz, with a rated current of 4.4 A. The connection must be performed by an electrician with the appropriate qualification.