DAB ACTIVE DRIVER PLUS M/T 1.0 – frequency inverter for pumps with a three-phase motor up to 1.0 kW
Code: 60169777Product detailed description
DAB ACTIVE DRIVER PLUS M/T 1.0 (code 60169777) is an integrated control system that adjusts the speed of a centrifugal pump through frequency and keeps constant pressure in the system even with variable flow. Pressure and other parameters, together with error messages, can be changed and displayed through a simple interface with a graphic display.
Use
The inverter is intended for surface pumps, 4" submersible pumps and 5" pumps with a three-phase motor with an input current of up to 4.7 A. According to the manufacturer no pressure tank is needed, and operation is quiet and economical.
Features
- pressure setting range 1–5 bar
- inlet DNA 1 1/4" male thread, outlet DNM 1 1/2" female thread
- protection rating IP55, vertical or horizontal mounting
- max. liquid temperature 50 °C, max. operating temperature 60 °C
- dimensions 237 × 282 × 185 mm, weight 3.5 kg
Protections and installation
The inverter provides software dry-run protection, electronic overcurrent protection, overheating protection of the power stage and protection against supply voltage abnormalities. The rated motor current must be set before commissioning. Leave the electrical connection to a qualified person.
Technical data
| Code | 60169777 |
| Manufacturer | DAB |
| Type | DAB.ACTIVE DRIVER PLUS |
| Model | ACTIVE DRIVER PLUS M/T 1.0 |
| Power supply | single-phase, 50/60 Hz |
| Pump motor | three-phase, up to 1.0 kW |
| Max. motor current | 4.7 A |
| Pressure setting range | 1–5 bar |
| Connection inlet / outlet | inlet 1 1/4" male thread / outlet 1 1/2" female thread |
| Protection rating | IP55 |
| Weight | 3.5 kg |
Frequently asked questions
Do I need a pressure tank with the inverter?
According to the manufacturer it is not necessary, although the inverter algorithm can also be adapted for operation with a tank.
Which pump can I connect to the M/T 1.0 model?
A surface pump, a 4" submersible pump or a 5" pump with a three-phase motor, with an input current of up to 4.7 A. At commissioning the rated motor current must be set in the inverter.
How is the inverter connected to the pipe?
Water flows through it: the inlet has a 1 1/4" male thread and the outlet a 1 1/2" female thread.
Additional parameters
| Category: | DAB.ACTIVE DRIVER PLUS, KIT AD - Frequency converter |
|---|---|
| Warranty: | 2 years |
| Weight: | 3.5 kg |
| Code: | 60169777 |
| Manufacturer: | DAB |
| Type: | DAB.ACTIVE DRIVER PLUS |
| Model: | ACTIVE DRIVER PLUS M/T 1.0 |
| Power supply: | single-phase, 50/60 Hz |
| Pump motor: | three-phase, up to 1.0 kW |
| Max. motor current: | 4.7 A |
| Pressure setting range: | 1–5 bar |
| Connection inlet / outlet: | inlet 1 1/4" male thread / outlet 1 1/2" female thread |
| Protection rating: | IP55 |
| Weight: | 3.5 kg |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!
