DAB CP2-G 40-6600/A/BQQE/11 – dry-running circulation pump, single, flanged
Code: 60213586Product detailed description
The CP2-G 40-6600/A/BQQE/11 is a single (not twin) pump with flanged suction and discharge ports of DN 40. According to the manufacturer's type key, the number in the model designation stands for the maximum head in centimetres, i.e. roughly 66 m.
Application
The CP2-G series is intended for circulating water in heating and air-conditioning systems, including systems with solar collectors, in commercial buildings. The pumped liquid should be clean, free of solid and abrasive particles, non-viscous, non-aggressive and non-crystallising; glycol content may be up to 50 %, liquid temperature from -15 to +140 °C and ambient temperature up to +50 °C.
Construction
The pump body and the intermediate piece are made of cast iron, the impeller of cast iron or technopolymer depending on the model, and the mechanical seal of silicon carbide with EPDM gaskets. The motor is an air-cooled, three-phase, two-pole asynchronous motor with IP55 protection and insulation class F. The flanges are PN10 – PN16 with threaded ports for test pressure gauges; the maximum operating pressure is 16 bar.
Data for this code
- Model designation: CP2-G 40-6600/A/BQQE/11
- Flange nominal size: DN 40
- Max. head (approx., from designation): ≈ 66 m
- Motor power: 11 kW
- Power supply: three-phase, 230 V / 400 V, 50 Hz
- Liquid temperature: -15 °C to +140 °C
Installation and operation
The pump should be installed by a qualified company. Electrical protection of the motor must be provided by the user. Installation is fixed, horizontal or vertical with the motor on top; for motor power from 7.5 kW only vertically.
Technical data
| Code | 60213586 |
| Manufacturer | DAB |
| Type | CP2-G, single dry-running pump |
| Model designation | CP2-G 40-6600/A/BQQE/11 |
| Flange nominal size | DN 40 |
| Max. head (approx., from designation) | ≈ 66 m |
| Motor power | 11 kW |
| Power supply | three-phase, 230 V / 400 V, 50 Hz |
| Liquid temperature | -15 °C to +140 °C |
| Glycol content | max. 50 % |
| Max. operating pressure | 16 bar |
| Flanges | PN10 – PN16 |
| Protection rating | IP55 |
| Insulation class | F |
Frequently asked questions
What systems is the CP2-G 40-6600/A/BQQE/11 pump intended for?
For circulating water in heating and air-conditioning systems, including solar ones, in commercial buildings.
What liquid temperature and glycol content are permitted?
The liquid may be from -15 to +140 °C and contain up to 50 % glycol; the ambient temperature may be up to +50 °C.
How is the pump connected to the piping?
By PN10 – PN16 flanges, nominal size DN 40; the flanges have threaded ports for test pressure gauges.
Does the motor need additional protection?
Yes, according to the data sheet the user must provide electrical protection of the motor.
Additional parameters
| Category: | DAB.CP,CP-G,DCP,DCP-G - Dry-Rotor Pumps, 2-Pole |
|---|---|
| Warranty: | 2 years |
| Code: | 60213586 |
| Manufacturer: | DAB |
| Type: | CP2-G, single dry-running pump |
| Model designation: | CP2-G 40-6600/A/BQQE/11 |
| Flange nominal size: | DN 40 |
| Max. head (approx., from designation): | ≈ 66 m |
| Motor power: | 11 kW |
| Power supply: | three-phase, 230 V / 400 V, 50 Hz |
| Liquid temperature: | -15 °C to +140 °C |
| Glycol content: | max. 50 % |
| Max. operating pressure: | 16 bar |
| Flanges: | PN10 – PN16 |
| Protection rating: | IP55 |
| Insulation class: | F |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!
