DAB CP2-G 50-5200 T 400/50 – dry-running circulation pump, single, flanged

Code: 60215297
Not rated Rating details
1 969,24 € –20 %
DAB CP2-G 50-5200 T 400/50 – suchobežné čerpadlo, jednotlivé prírubové
1 969,24 € –20 % 1 575,39 € / pcs 1 280,80 € excl. VAT Measure price:
International delivery
To order (1-2 weeks)

Detailed information

Product detailed description

The CP2-G 50-5200 T 400/50 is a single (not twin) pump with flanged suction and discharge ports of DN 50. According to the manufacturer's type key, the number in the model designation stands for the maximum head in centimetres, i.e. roughly 52 m.

Application

The CP2-G series is intended for circulating water in heating and air-conditioning systems, including systems with solar collectors, in commercial buildings. The pumped liquid should be clean, free of solid and abrasive particles, non-viscous, non-aggressive and non-crystallising; glycol content may be up to 50 %, liquid temperature from -15 to +140 °C and ambient temperature up to +50 °C.

Construction

The pump body and the intermediate piece are made of cast iron, the impeller of cast iron or technopolymer depending on the model, and the mechanical seal of silicon carbide with EPDM gaskets. The motor is an air-cooled, three-phase, two-pole asynchronous motor with IP55 protection and insulation class F. The flanges are PN10 – PN16 with threaded ports for test pressure gauges; the maximum operating pressure is 16 bar.

Data for this code

  • Model designation: CP2-G 50-5200 T 400/50
  • Flange nominal size: DN 50
  • Max. head (approx., from designation): ≈ 52 m
  • Power supply: three-phase, 400 V, 50 Hz
  • Liquid temperature: -15 °C to +140 °C

Installation and operation

The pump should be installed by a qualified company. Electrical protection of the motor must be provided by the user. Installation is fixed, horizontal or vertical with the motor on top.

Technical data

Code60215297
ManufacturerDAB
TypeCP2-G, single dry-running pump
Model designationCP2-G 50-5200 T 400/50
Flange nominal sizeDN 50
Max. head (approx., from designation)≈ 52 m
Power supplythree-phase, 400 V, 50 Hz
Liquid temperature-15 °C to +140 °C
Glycol contentmax. 50 %
Max. operating pressure16 bar
FlangesPN10 – PN16
Protection ratingIP55
Insulation classF

Frequently asked questions

What systems is the CP2-G 50-5200 T 400/50 pump intended for?
For circulating water in heating and air-conditioning systems, including solar ones, in commercial buildings.

What liquid temperature and glycol content are permitted?
The liquid may be from -15 to +140 °C and contain up to 50 % glycol; the ambient temperature may be up to +50 °C.

How is the pump connected to the piping?
By PN10 – PN16 flanges, nominal size DN 50; the flanges have threaded ports for test pressure gauges.

Does the motor need additional protection?
Yes, according to the data sheet the user must provide electrical protection of the motor.

Additional parameters

Category: DAB.CP,CP-G,DCP,DCP-G - Dry-Rotor Pumps, 2-Pole
Warranty: 2 years
Code: 60215297
Manufacturer: DAB
Type: CP2-G, single dry-running pump
Model designation: CP2-G 50-5200 T 400/50
Flange nominal size: DN 50
Max. head (approx., from designation): ≈ 52 m
Power supply: three-phase, 400 V, 50 Hz
Liquid temperature: -15 °C to +140 °C
Glycol content: max. 50 %
Max. operating pressure: 16 bar
Flanges: PN10 – PN16
Protection rating: IP55
Insulation class: F

Product rating

Be the first who will post an article to this item!

Do not fill out this field

How would you rate this product? Choose 1 to 5 stars, where 1 is the worst and 5 is the best rating.

Discussion

Be the first who will post an article to this item!

Do not fill out this field
Vytvořil Shoptet | Design Shoptak.cz.