DAB CP2E 40-2200/P/BQQE/2,2 T 50/60 NGD – dry-running circulation pump, single, flanged
Code: 60217548Product detailed description
The CP2E 40-2200/P/BQQE/2,2 T 50/60 NGD is a single flanged dry-running pump (DN 40) from the DAB CP2E series with electronic control. The number in the designation corresponds to a maximum head of roughly 22 m, and the motor power is 2.2 kW. The code name carries the designation NGD; the CP2E family uses a permanent-magnet motor combined with the NgDrive controller. According to the manufacturer, the motor belongs to efficiency class IE5.
Application
The series is intended for circulating water in heating and air-conditioning systems of commercial and residential buildings. The pumped liquid should be clean, free of solid and abrasive particles, non-viscous, non-crystallising and chemically neutral; glycol up to 50 %, liquid from -15 to +140 °C, ambient up to +50 °C, pressure up to 16 bar.
Construction
The impeller is made of cast iron or technopolymer depending on the model, the mechanical seal of silicon carbide with EPDM gasket. The flanges are PN10/16, the motor has IP55 protection and insulation class F. A spacer allows the length of the mechanical seal to be adapted, and the standard shaft distance makes it easier to replace older pumps in existing systems. DConnect enables remote monitoring and management.
Data for this code
- Model designation: CP2E 40-2200/P/BQQE/2,2 T 50/60 NGD
- Flange nominal size: DN 40
- Max. head (approx., from designation): ≈ 22 m
- Motor power: 2.2 kW
- Control: NGD (as in the code name)
- Liquid temperature: -15 °C to +140 °C
Installation and operation
The pump should be installed by a qualified company. Installation is fixed, horizontal or vertical with the motor above the pump; for restrictions on position at higher power ratings see the manufacturer's manual.
Technical data
| Code | 60217548 |
| Manufacturer | DAB |
| Type | CP2E, single electronic dry-running pump |
| Model designation | CP2E 40-2200/P/BQQE/2,2 T 50/60 NGD |
| Flange nominal size | DN 40 |
| Max. head (approx., from designation) | ≈ 22 m |
| Motor power | 2.2 kW |
| Control | NGD (as in the code name) |
| Liquid temperature | -15 °C to +140 °C |
| Glycol content | max. 50 % |
| Max. operating pressure | 16 bar |
| Flanges | PN10/16 |
| Protection rating | IP55 |
| Motor efficiency class | IE5 |
| Insulation class | F |
Frequently asked questions
What systems is the CP2E 40-2200/P/BQQE/2,2 T 50/60 NGD pump intended for?
For circulating water in heating and air-conditioning systems of commercial and residential buildings.
What liquid temperature and glycol content are permitted?
The liquid may be from -15 to +140 °C and contain up to 50 % glycol; the ambient temperature may be up to +50 °C.
Can the pump be monitored remotely?
According to the manufacturer, DConnect enables remote monitoring and management of the series.
Is the pump suitable for replacing an older unit?
The series has a standard shaft distance intended for replacing obsolete pumps, and a spacer allows the length of the mechanical seal to be adapted; check the dimensions before replacing.
Additional parameters
| Category: | DAB.CPE,CP-GE,DCPE,DCP-GE - Electronic Dry-Rotor Pumps, 2-Pole |
|---|---|
| Warranty: | 2 years |
| Code: | 60217548 |
| Manufacturer: | DAB |
| Type: | CP2E, single electronic dry-running pump |
| Model designation: | CP2E 40-2200/P/BQQE/2,2 T 50/60 NGD |
| Flange nominal size: | DN 40 |
| Max. head (approx., from designation): | ≈ 22 m |
| Motor power: | 2.2 kW |
| Control: | NGD (as in the code name) |
| Liquid temperature: | -15 °C to +140 °C |
| Glycol content: | max. 50 % |
| Max. operating pressure: | 16 bar |
| Flanges: | PN10/16 |
| Protection rating: | IP55 |
| Motor efficiency class: | IE5 |
| Insulation class: | F |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!
