DAB CP2E 50-2100/P/BQQE/3 T 50 – dry-rotor in-line pump with MCE/C inverter, DN 50 flanges, 3 kW
Code: 60217565Product detailed description
The DAB CP2E 50-2100/P/BQQE/3 T 50 (code 60217565) is a single dry-rotor circulating pump in in-line layout whose speed is controlled by an MCE/C frequency inverter. It is used for circulating water in heating and air-conditioning systems of commercial and residential buildings. The CP2E range is also made as the twin version DCP2E.
Design
- DN 50 flanges for PN 10 and PN 16, suction and delivery ports aligned
- silicon carbide mechanical seal with EPDM gasket, which lets the pump handle liquid with up to 50 % glycol, even at very low temperatures
- an easy-to-fit spacer allows the pump to be adapted to different installation standards
- the standard port-to-port length makes it easier to replace an older pump in an existing system
Motor and control
The 3 kW three-phase motor in efficiency class IE3 runs on 3 × 230 V or 3 × 400 V, 50 Hz; its speed is controlled by the MCE/C inverter. Motor protection IP55, insulation class F, maximum speed 2950 rpm. The number 2100 in the type designation gives the maximum head in centimetres, i.e. about 21 m.
Operating conditions
The pumped liquid must be clean, free of solid and abrasive substances, non-viscous, non-crystallising and chemically neutral. Liquid temperature −15 to +140 °C, ambient temperature up to +50 °C, maximum operating pressure 16 bar. The pump is installed in a fixed horizontal or vertical position with the motor above the pump. Leave the electrical connection and inverter set-up to a qualified specialist.
Technical data
| Code | 60217565 |
| Manufacturer | DAB |
| Type | DAB.CP2E |
| Model | CP2E 50-2100/P/BQQE/3 T 50 |
| Version | single, flanged in-line |
| Speed control | MCE/C frequency inverter |
| Motor output | 3 kW |
| Motor efficiency class | IE3 |
| Power supply | 3 × 230 V / 3 × 400 V, 50 Hz |
| Flanges | DN 50, PN 10 / PN 16 |
| Max. head | approx. 21 m |
| Liquid temperature | −15 to +140 °C |
| Max. operating pressure | 16 bar |
| Max. glycol content | 50 % |
| Protection / insulation class | IP55 / F |
Frequently asked questions
Which systems is the CP2E 50-2100 pump designed for?
For circulating water in heating and air-conditioning systems of commercial and residential buildings. Thanks to the silicon carbide seal it also handles mixtures with up to 50 % glycol.
What does the MCE/C inverter do?
The pump is supplied with the MCE/C frequency inverter, which controls the speed of the 3 kW three-phase motor. Connection and set-up should be carried out by a qualified electrician.
In which position can it be installed?
Fixed in a horizontal or vertical position, always with the motor above the pump. The DN 50 flanges are rated for PN 10 and PN 16.
Additional parameters
| Category: | DAB.CPE,CP-GE,DCPE,DCP-GE - Electronic Dry-Rotor Pumps, 2-Pole |
|---|---|
| Warranty: | 2 years |
| Code: | 60217565 |
| Manufacturer: | DAB |
| Type: | DAB.CP2E |
| Model: | CP2E 50-2100/P/BQQE/3 T 50 |
| Version: | single, flanged in-line |
| Speed control: | MCE/C frequency inverter |
| Motor output: | 3 kW |
| Motor efficiency class: | IE3 |
| Power supply: | 3 × 230 V / 3 × 400 V, 50 Hz |
| Flanges: | DN 50, PN 10 / PN 16 |
| Max. head: | approx. 21 m |
| Liquid temperature: | −15 to +140 °C |
| Max. operating pressure: | 16 bar |
| Max. glycol content: | 50 % |
| Protection / insulation class: | IP55 / F |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!
