DAB E.SWIM 150 – electronic pool pump with frequency inverter and pre-filter, 1.1 kW, 230 V – SPECIAL OFFER

Product detailed description

DAB E.SWIM 150 (code 60194426) is an electronic pump with an integrated high-capacity pre-filter for circulation and water filtration in domestic swimming pools. The synchronous brushless motor with permanent magnets is controlled by a frequency converter and is cooled by the pumped water – it does not require a fan, so it runs very quietly and can be installed even in smaller spaces without significant air exchange. According to the manufacturer, one model can replace the performance of four conventional pumps ranging from 0.5 to 1.5 HP.

Control

• 4 buttons with pre-set speeds, factory set at 50, 70, 85 and 100 % (2250 to 4500 rpm)
• constant speed or constant flow mode without sensors
• timers, AUTO button for scheduled operation and QUICK CLEAN button for high-speed operation
• LCD display showing operating time, mode and status, LED indicators, frost protection
• external inputs: digital and analog 0–10 V or 4–20 mA

Technical data

• head 15.9 m at zero flow, 9.4 m at 24 m³/h and 6.3 m at 30 m³/h
• power supply 1 × 230 V, 50/60 Hz, max. input power P1 1250 W, P2 1.1 kW (1.5 HP), current 5.6 A
• noise level at medium load 50 dB(A)
• suction and discharge 2", weight 19 kg
• water temperature up to +40 °C, pH 6.5–8.4, ambient temperature up to +50 °C, max. operating pressure 2.5 bar
• motor and electronics protection IPX5, insulation class F

The hydraulics are made of glass-fibre reinforced technopolymer, the filter lid is made of transparent polycarbonate, the filling and draining plug can be removed without tools and the base has rubber feet to reduce vibrations. The pump can handle water with high chlorine or bromine content, PHMB or electrolytic chlorination. It must be installed fixed in a horizontal position; the 2"/50–63 coupling set is available as an accessory. Electrical connections should be made by a qualified technician.

Technical parameters

Frequently asked questions

Why is E.SWIM 150 so quiet?
The motor with permanent magnets is cooled by the pumped water, so it does not need a fan. At medium load, it has a noise level of 50 dB(A).

How are the speeds set?
The pump has four buttons with pre-set speeds (factory set at 50 to 100 %), timers and an AUTO button for scheduled operation. It can operate with constant speed or with constant flow.

Can the pump be connected to an external control system?
Yes, it has a digital input and an analog input 0–10 V or 4–20 mA.

What connection does the pump have?
Suction and discharge are both 2". A 2"/50–63 set with two couplings and an O-ring is available as an accessory.