DAB EUROSWIM 300 M Pool Pump
Code: 60122213Related products
Product detailed description
High-performance pump for pool filtration
EUROSWIM 300 M from manufacturer DAB is a self-priming swimming pool pump with an integrated pre-filter. Among the single-phase versions of the EUROSWIM range, it is the most powerful – the motor has a rated power of 2.2 kW (3 HP) and a power consumption of up to 2 800 W. The range covers flow rates up to 42 m³/h and a head pressure of up to 22 m. The pump operates very quietly and reliably; it can also be used outside pools, for example when handling aggressive liquids in agriculture and industry.
Chlorine-resistant construction
- pump body and impeller made of glass-fibre reinforced technical polymer, diffuser made of reinforced technical polymer
- pre-filter with transparent polycarbonate lid – the state of the filter screen is clearly visible at a glance
- mechanical seal with NBR elastomer and parts made of stainless steel AISI 316
- two-pole asynchronous motor cooled by an external fan, housing with special electrophoretic treatment against corrosion
- integrated thermal and overload protection for the motor
- suction and discharge ports 2"
Liquids pumped and operating conditions
The pump can handle clean water as well as water slightly contaminated with suspended particles or long fibres. It is suitable for highly aggressive water with high chlorine or bromine content, PHMB or for water treated by salt electrolysis. Maximum liquid temperature +60 °C, ambient temperature +50 °C, operating pressure up to 2.5 bar. It is powered by a single-phase network 220–240 V/50 Hz (rated current 12 A, capacitor 40 µF/450 V); electrical connection must be carried out by a qualified electrician.
The same performance in three-phase configuration is offered by the EUROSWIM 300 T; smaller needs are covered by models EUROSWIM 50 to 200.
Technical specifications
| Code | 60122213 |
| Manufacturer | DAB |
| Type | DAB.EUROSWIM |
| Model | EUROSWIM 300 M |
| Power supply | 1 × 220–240 V, 50 Hz |
| Maximum input power P1 | 2 800 W |
| Rated output power P2 | 2.2 kW (3 HP) |
| Rated current | 12 A |
| Capacitor | 40 µF / 450 V |
| Suction / discharge port | 2" / 2" |
| Maximum liquid temperature | +60 °C |
| Maximum ambient temperature | +50 °C |
| Maximum operating pressure | 2.5 bar |
| Cable gland protection class | IP55 |
| Insulation class | F |
Frequently asked questions
Is the pump self-priming and does it have its own pre-filter?
Yes, the EUROSWIM 300 M is a self-priming pump with an integrated pre-filter. Thanks to the transparent polycarbonate lid, the condition of the filter screen is clearly visible at a glance.
Can the pump handle water with high chlorine content?
Yes, it is suitable for highly aggressive water with high chlorine or bromine content, PHMB and for water treated by chlorine electrolysis. The body and impeller are made of glass-fibre reinforced technical polymer and the motor housing has an electrophoretic coating to prevent oxidation.
What power supply does the pump require and does it have motor protection?
The 300 M model is single-phase for 220–240 V / 50 Hz network with a rated current of 12 A and has built-in thermal and overload protection. For three-phase networks, the EUROSWIM 300 T is available; connection must be performed by a qualified electrician.
Additional parameters
| Category: | DAB.EUROCOM - Pool Pump - Multi-Stage |
|---|---|
| Warranty: | 2 years |
| Availability: | In stock or at supplier |
| Code: | 60122213 |
| Manufacturer: | DAB |
| Type: | DAB.EUROSWIM |
| Model: | EUROSWIM 300 M |
| Power supply: | 1 × 220–240 V, 50 Hz |
| Max. power input P1: | 2800 W |
| Rated output P2: | 2.2 kW (3 HP) |
| Rated current: | 12 A |
| Capacitor: | 40 µF / 450 V |
| Suction / discharge: | 2" / 2" |
| Max. liquid temperature: | +60 °C |
| Max. ambient temperature: | +50 °C |
| Max. operating pressure: | 2.5 bar |
| Terminal box protection: | IP55 |
| Insulation class: | F |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!
IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.
Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.
Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.
“Made in Italy” adds value
IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.
The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.
Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.
The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.
As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.