DAB EVOPLUS B 100/340.65 SAN M – flanged electric circulation pump for hot water, bronze body, DN 65
Code: 60151177Product detailed description
EVOPLUS B 100/340.65 SAN M (code 60151177) is a simple flanged pump from the DAB EVOPLUS series intended for larger systems. The SAN version has a bronze body, so the manufacturer recommends it for potable water – especially for circulation of hot utility water in a secondary circuit. The electronic control reacts to changing demand in the system and reduces speed wherever full performance is not needed.
Technical specifications of the model
- max. head 10.0 m, max. flow 41.71 m³/h
- max. input power P1 590 W, supply voltage 1 × 220–240 V, 50/60 Hz
- flanges DN 65, back flanges DN 65 PN 10 on request
- mounting length 340 mm, weight 20 kg
- fluid temperature −10 to +110 °C, max. pressure 16 bar
- protection class IP44, insulation class F
Control and communication
The control panel has an OLED display and three navigation buttons. The factory setting is proportional differential pressure (ΔP-v), further options include constant differential pressure (ΔP-c) or constant curve. The electronics directly process start/stop, energy-saving mode, analog signals 0–10 V and 4–20 mA, PWM, temperature sensor signal for ΔT and ModBus communication; LonBus is available with an additional module. For the SAN version, the manufacturer also specifies a constant temperature mode, which maintains the water temperature in the circulation pipe without thermostatic valves.
Construction and installation
Suction and discharge flanged nozzles have threaded connections for pressure and temperature measurement. The simple design is delivered with body insulation to reduce heat loss, according to the technical sheet. The pump is installed with the motor shaft in a horizontal position; the motor has built-in protection against overload, overheating and voltage fluctuations. Connecting to the power supply should be done by a qualified technician.
Technical parameters
| Code | 60151177 |
| Brand | DAB |
| Type | DAB.EVOPLUS SAN |
| Model | EVOPLUS B 100/340.65 SAN M |
| Max. head | 10.0 m |
| Max. flow | 41.71 m³/h |
| Max. input power P1 | 590 W |
| Connection | flange DN 65 |
| Mounting length | 340 mm |
| Body material | bronze |
| Fluid temperature | −10 … +110 °C |
| Max. operating pressure | 16 bar |
| Supply voltage | 1 × 220–240 V, 50/60 Hz |
| Protection class / insulation class | IP44 / F |
| Weight | 20 kg |
Frequently asked questions
What is the EVOPLUS B 100/340.65 SAN M pump intended for?
For circulation of hot utility water in larger systems. According to the manufacturer, the bronze body of the SAN version is suitable for potable water, while the cast iron models of EVOPLUS without the SAN designation are not intended for this purpose.
Are the back flanges included in the package?
No, the back flanges DN 65 PN 10 are ordered separately according to the technical sheet. The mounting length of the pump between the flanges is 340 mm.
Can the pump be connected to a building control system?
Yes, the electronics have inputs 0–10 V, 4–20 mA and PWM, start/stop control and ModBus interface. An additional module is required for LonBus.
Additional parameters
| Category: | DAB.EVOPLUS SAN - Electronic Circulation Pumps for Hot-Water Systems |
|---|---|
| Warranty: | 2 years |
| Weight: | 20 kg |
| Availability: | In stock or at supplier |
| Code: | 60151177 |
| Brand: | DAB |
| Type: | DAB.EVOPLUS SAN |
| Model: | EVOPLUS B 100/340.65 SAN M |
| Max. head: | 10.0 m |
| Max. flow: | 41.71 m³/h |
| Max. power input P1: | 590 W |
| Connection: | flange DN 65 |
| Port-to-port length: | 340 mm |
| Pump body material: | bronze |
| Liquid temperature: | −10 … +110 °C |
| Max. operating pressure: | 16 bar |
| Power supply: | 1 × 220–240 V, 50/60 Hz |
| Protection / insulation class: | IP44 / F |
| Weight: | 20 kg |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!