DAB EVOPLUS B 120/220.32 SAN M – flanged electric circulation pump for hot water, bronze body, DN 32
Code: 60151163Product detailed description
EVOPLUS B 120/220.32 SAN M (code 60151163) is a simple flanged pump from the DAB EVOPLUS series intended for larger systems. The SAN version has a bronze body and is therefore suitable for potable water – primarily for circulation of hot utility water in a secondary circuit. The electronic control reacts to changing demand in the system and reduces speed wherever full performance is not required.
Technical specifications of the model
- max. head 12.0 m, max. flow 17.01 m³/h
- max. power P1 340 W, power supply 1 × 220–240 V, 50/60 Hz
- flanges DN 32, back flanges DN 32 PN 6 on request
- mounting length 220 mm, weight 14 kg
- fluid temperature −10 to +110 °C, max. pressure 16 bar
- protection class IP44, insulation class F
Control and communication
The control panel has an OLED display and three navigation buttons. The factory setting is proportional differential pressure (ΔP-v), further options include constant differential pressure (ΔP-c) or constant curve. The electronics directly process start/stop, energy-saving mode, analog signals 0–10 V and 4–20 mA, PWM, temperature sensor signal for ΔT and ModBus communication; LonBus is available with an additional module. For the SAN version, the manufacturer also specifies a constant temperature mode, which maintains the water temperature in the circulation pipe without thermostatic valves.
Construction and installation
Suction and discharge flanged nozzles have threaded connections for pressure and temperature measurement. The simple design comes with body insulation according to the technical sheet to reduce heat loss. The pump is installed with the motor shaft in a horizontal position; the motor has built-in protection against overload, overheating and voltage fluctuations. Connecting to the power supply should be done by a qualified person.
Technical parameters
| Code | 60151163 |
| Brand | DAB |
| Type | DAB.EVOPLUS SAN |
| Model | EVOPLUS B 120/220.32 SAN M |
| Max. head | 12.0 m |
| Max. flow | 17.01 m³/h |
| Max. power P1 | 340 W |
| Connection | flange DN 32 |
| Mounting length | 220 mm |
| Body material | bronze |
| Fluid temperature | −10 … +110 °C |
| Max. operating pressure | 16 bar |
| Power supply | 1 × 220–240 V, 50/60 Hz |
| Protection class / insulation class | IP44 / F |
| Weight | 14 kg |
Frequently asked questions
What is the EVOPLUS B 120/220.32 SAN M pump intended for?
For circulation of hot utility water in larger systems. According to the manufacturer, the bronze body of the SAN version is suitable for potable water, while cast iron models of EVOPLUS without the SAN designation are not intended for this purpose.
Are the back flanges part of the package?
No, back flanges DN 32 PN 6 are ordered separately according to the technical sheet. The mounting length of the pump between flanges is 220 mm.
Can the pump be connected to a building control system?
Yes, the electronics have inputs 0–10 V, 4–20 mA and PWM, start/stop control and ModBus interface. An additional module is required for LonBus.
Additional parameters
| Category: | DAB.EVOPLUS SAN - Electronic Circulation Pumps for Hot-Water Systems |
|---|---|
| Warranty: | 2 years |
| Weight: | 14 kg |
| Availability: | In stock or at supplier |
| Code: | 60151163 |
| Brand: | DAB |
| Type: | DAB.EVOPLUS SAN |
| Model: | EVOPLUS B 120/220.32 SAN M |
| Max. head: | 12.0 m |
| Max. flow: | 17.01 m³/h |
| Max. power input P1: | 340 W |
| Connection: | flange DN 32 |
| Port-to-port length: | 220 mm |
| Pump body material: | bronze |
| Liquid temperature: | −10 … +110 °C |
| Max. operating pressure: | 16 bar |
| Power supply: | 1 × 220–240 V, 50/60 Hz |
| Protection / insulation class: | IP44 / F |
| Weight: | 14 kg |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!