DAB EVOPLUS B 120/250.40 SAN M – flanged electric circulation pump for hot water, bronze body, DN 40

Product detailed description

EVOPLUS B 120/250.40 SAN M (code 60151164) is a simple flanged pump from the DAB EVOPLUS series intended for larger systems. The SAN version has a bronze body, so the manufacturer recommends it for potable water – especially for circulation of hot water in the secondary circuit. The electronic control reacts to changing demand in the system and reduces speed wherever full performance is not needed.

Technical data of the model

• max. delivery head 12.0 m, max. flow rate 23.48 m³/h
• max. input power P1 465 W, power supply 1 × 220–240 V, 50/60 Hz
• flanges DN 40, back flanges DN 40 PN 10 on order
• mounting length 250 mm, weight 16 kg
• fluid temperature −10 to +110 °C, max. pressure 16 bar
• protection class IP44, insulation class F

Control and communication

The control panel has an OLED display and three navigation buttons. The factory setting is proportional differential pressure (ΔP-v), further options include constant differential pressure (ΔP-c) or constant curve. The electronics directly process start/stop, energy-saving mode, analog signals 0–10 V and 4–20 mA, PWM, temperature sensor signal for ΔT and ModBus communication; LonBus is available with an additional module. For the SAN version, the manufacturer also offers a constant temperature mode, which maintains the water temperature in the circulation pipe without thermostatic valves.

Construction and installation

Suction and discharge flanged nozzles have threaded connections for pressure and temperature measurement. The simple design, according to the technical sheet, is delivered with body insulation to reduce heat loss. The pump is installed with the motor shaft in a horizontal position; the motor has built-in protection against overload, overheating and voltage fluctuations. Connecting to the power supply should be done by a qualified technician.

Technical parameters

Frequently asked questions

What is the EVOPLUS B 120/250.40 SAN M pump intended for?
For circulation of hot water in larger distribution systems. According to the manufacturer, the bronze body of the SAN version is suitable for potable water, while cast iron models of EVOPLUS without the SAN designation are not.

Are back flanges included in the package?
No, back flanges DN 40 PN 10 are ordered separately according to the technical sheet. The mounting length of the pump between flanges is 250 mm.

Can the pump be connected to a building control system?
Yes, the electronics have inputs 0–10 V, 4–20 mA and PWM, start/stop control and ModBus interface. An additional module is required for LonBus.