DAB EVOPLUS B 150/340.65 SAN M – flanged electric circulation pump for hot water, bronze body, DN 65
Code: 60151179Product detailed description
EVOPLUS B 150/340.65 SAN M (code 60151179) is a simple flanged pump from the DAB EVOPLUS series designed for larger systems. The SAN version has a bronze body, so the manufacturer recommends it for potable water – especially for hot water circulation in a secondary circuit. The electronic control reacts to changing demand in the system and reduces speed wherever full performance is not needed.
Technical specifications of the model
- max. delivery head 15.0 m, max. flow rate 53.44 m³/h
- max. input power P1 1210 W, power supply 1 × 220–240 V, 50/60 Hz
- flanges DN 65, back flanges DN 65 PN 10 on request
- mounting length 340 mm, weight 20 kg
- fluid temperature −10 to +110 °C, max. pressure 16 bar
- protection class IP44, insulation class F
Control and communication
The control panel has an OLED display and three navigation buttons. The factory setting is proportional differential pressure (ΔP-v), further options include constant differential pressure (ΔP-c) or constant curve. The electronics directly process start/stop, energy-saving mode, analog signals 0–10 V and 4–20 mA, PWM, temperature sensor signal for ΔT and ModBus communication; LonBus is available with an additional module. For the SAN version, the manufacturer also specifies a constant temperature mode, which maintains the water temperature in the circulation pipe without thermostatic valves.
Construction and installation
Suction and discharge flanged nozzles have threaded connections for pressure and temperature measurement. The simple design is delivered with body insulation to reduce heat loss, according to the technical sheet. The pump is installed with the motor shaft in a horizontal position; the motor has built-in protection against overload, overheating and voltage fluctuations. Connecting to the power supply should be done by a qualified technician.
Technical parameters
| Code | 60151179 |
| Brand | DAB |
| Type | DAB.EVOPLUS SAN |
| Model | EVOPLUS B 150/340.65 SAN M |
| Max. delivery head | 15.0 m |
| Max. flow rate | 53.44 m³/h |
| Max. input power P1 | 1210 W |
| Connection | flange DN 65 |
| Mounting length | 340 mm |
| Body material | bronze |
| Fluid temperature | −10 … +110 °C |
| Max. operating pressure | 16 bar |
| Power supply | 1 × 220–240 V, 50/60 Hz |
| Protection class / insulation class | IP44 / F |
| Weight | 20 kg |
Frequently asked questions
What is the EVOPLUS B 150/340.65 SAN M pump used for?
For hot water circulation in larger systems. According to the manufacturer, the bronze body of the SAN version is suitable for potable water, while cast iron models of EVOPLUS without the SAN designation are not intended for this purpose.
Are the back flanges part of the package?
No, the back flanges DN 65 PN 10 are ordered separately according to the technical sheet. The mounting length of the pump between the flanges is 340 mm.
Can the pump be connected to a building control system?
Yes, the electronics have inputs 0–10 V, 4–20 mA and PWM, start/stop control and ModBus interface. An additional module is required for LonBus.
Additional parameters
| Category: | DAB.EVOPLUS SAN - Electronic Circulation Pumps for Hot-Water Systems |
|---|---|
| Warranty: | 2 years |
| Weight: | 20 kg |
| Availability: | In stock or at supplier |
| Code: | 60151179 |
| Brand: | DAB |
| Type: | DAB.EVOPLUS SAN |
| Model: | EVOPLUS B 150/340.65 SAN M |
| Max. head: | 15.0 m |
| Max. flow: | 53.44 m³/h |
| Max. power input P1: | 1210 W |
| Connection: | flange DN 65 |
| Port-to-port length: | 340 mm |
| Pump body material: | bronze |
| Liquid temperature: | −10 … +110 °C |
| Max. operating pressure: | 16 bar |
| Power supply: | 1 × 220–240 V, 50/60 Hz |
| Protection / insulation class: | IP44 / F |
| Weight: | 20 kg |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!