DAB EVOPLUS B SMALL 60/250.40 SAN M – electronic circulator for domestic hot water recirculation, bronze body, DN 40
Code: 60151155Product detailed description
The EVOPLUS B SMALL 60/250.40 SAN M (code 60151155) is the SAN version of the DAB EVOPLUS SMALL range. It differs from the standard models by its bronze pump body, which is why the manufacturer specifies it for drinking water – typically for the domestic hot water recirculation loop. The electronics continuously track changes in the system's hydraulics and adjust the motor speed so that recirculation runs with the lowest possible energy consumption.
Model data
- max. head 6.0 m, max. flow 9.8 m³/h
- max. power input P1 105 W, supply 1 × 220–240 V, 50/60 Hz
- DN 40 flanges with 4 holes for PN 6/PN 10/PN 16 counterflanges, DN 40 PN 10 counterflanges available to order
- port-to-port length 250 mm, weight 6.9 kg
Control and operation
Proportional differential pressure (ΔP-v) is set at the factory; for this mode the manufacturer states the best energy efficiency index. Constant differential pressure (ΔP-c) and a constant curve with fixed speed can also be selected. For the SAN version the manufacturer describes a constant-temperature mode that holds the required water temperature in the recirculation pipe without thermostatic valves. Settings are made on an OLED display with four navigation buttons; remote control (0–10 V, PWM, 4–20 mA, ModBus) is possible with optional expansion modules.
Operating conditions
- liquid temperature −10 to +110 °C, ambient temperature max. +40 °C
- max. operating pressure 16 bar
- protection rating IP44, insulation class F
- clean liquid free of solids and mineral oils
The circulator is installed with the motor shaft horizontal. The motor is protected against overload, overheating, overvoltage and undervoltage, so no external motor protection is needed. Electrical connection and earthing must be carried out by a qualified electrician.
Technical data
| Code | 60151155 |
| Brand | DAB |
| Type | DAB.EVOPLUS SMALL SAN |
| Model | EVOPLUS B SMALL 60/250.40 SAN M |
| Max. head | 6.0 m |
| Max. flow | 9.8 m³/h |
| Max. power input P1 | 105 W |
| Connection | flange DN 40 |
| Port-to-port length | 250 mm |
| Pump body material | bronze |
| Liquid temperature | −10 … +110 °C |
| Max. operating pressure | 16 bar |
| Power supply | 1 × 220–240 V, 50/60 Hz |
| Protection / insulation class | IP44 / F |
| Weight | 6.9 kg |
Frequently asked questions
Is the EVOPLUS B SMALL 60/250.40 SAN M suitable for drinking water?
Yes. The SAN version has a bronze body and, according to the manual, is intended for drinking water, for example for domestic hot water recirculation. Cast-iron EVOPLUS models without the SAN designation are not intended for domestic water.
Are counterflanges supplied with the circulator?
According to the data sheet, DN 40 PN 10 counterflanges are available to order. The circulator flanges have 4 holes and match PN 6, PN 10 and PN 16 counterflanges.
How is the circulator installed correctly?
The motor shaft must be horizontal and the electronics in a vertical position. The flow direction is shown by the arrow on the body; shut-off valves on the suction and discharge side make inspection and maintenance easier.
Additional parameters
| Category: | DAB.EVOPLUS SMALL - Electronic Circulation Pumps for Small Heating/Air-Conditioning |
|---|---|
| Warranty: | 2 years |
| Weight: | 6.9 kg |
| Code: | 60151155 |
| Brand: | DAB |
| Type: | DAB.EVOPLUS SMALL SAN |
| Model: | EVOPLUS B SMALL 60/250.40 SAN M |
| Max. head: | 6.0 m |
| Max. flow: | 9.8 m³/h |
| Max. power input P1: | 105 W |
| Connection: | flange DN 40 |
| Port-to-port length: | 250 mm |
| Pump body material: | bronze |
| Liquid temperature: | −10 … +110 °C |
| Max. operating pressure: | 16 bar |
| Power supply: | 1 × 220–240 V, 50/60 Hz |
| Protection / insulation class: | IP44 / F |
| Weight: | 6.9 kg |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!
