DAB EVOPLUS LITE 80/180-32 – electronic circulation pump for small heating and air conditioning systems, 2" thread

Product detailed description

EVOPLUS LITE 80/180-32 (code 60218207) is a wet-rotor pump with a synchronous motor with permanent magnets, designed by DAB for heating and air conditioning circuits in smaller buildings. Operation is intentionally simple: one button, an easy-to-read display with 7 LED indicators and a plug-and-play power connector.

Model parameters

• max. head 8.0 m
• max. power P1 129 W, current 1.04 A, power supply 1 × 220–240 V, 50/60 Hz
• energy efficiency index EEI ≤ 0.21
• threaded connection 2" (version -32)
• mounting length 180 mm, weight 3.5 kg

Functions

• six performance levels – three proportional and three constant differential pressure curves
• the motor head can be rotated into three positions, which facilitates installation in confined spaces
• sleep mode: when the pump is idle, it circulates water every 25 hours to prevent limescale buildup
• enhanced insulation between the motor and electronics with air flow

Operating conditions

• fluid temperature −20 to +110 °C, ambient max. +40 °C
• max. operating pressure 16 bar, glycol content max. 30 %
• protection class IPX4, insulation class F, sound pressure ≤ 33 dB(A)

The impeller is made of technopolymer, the aluminum shaft rotates in graphite bearings lubricated by the pumped liquid. After installation, the motor shaft must be in a horizontal position. According to the manufacturer, the body insulation covers are optional accessories and sold separately.

Technical parameters

Frequently asked questions

How is the performance of the EVOPLUS LITE 80/180-32 pump adjusted?
Using a single button, one of six curves can be selected – three for proportional and three for constant differential pressure. The selected setting is displayed on the 7 LED display.

Can the pump be used in air conditioning?
Yes, the EVOPLUS LITE series is suitable for both heating and air conditioning circuits. Condensation forming on the body due to cold liquid does not endanger the electronics – however, four vent holes must not be covered for proper drainage.

Is the mounting bracket included in the package?
No, the brackets are separate accessories. The manufacturer offers them with internal threads 1/2", 3/4", 1", and 5/4", and with external threads 6/4". The power connector is supplied with the pump.