DAB EVOSTA3 80/130 (1/2") – electronic circulating pump for heating and air-conditioning systems, 130 mm installation length
Code: 60186091Product detailed description
EVOSTA3 80/130 (1/2") (code 60186091) is a DAB electronic circulating pump with a permanent-magnet synchronous motor for heating and air-conditioning circuits. With a 130 mm installation length it produces a head of up to 8 m and moves up to 4.2 m³/h; the body has a G 1" (DN 15) thread.
Model data
- max. head 8 m
- max. flow rate 4.2 m³/h
- max. power input P1 55 W, current 0.053–0.47 A, supply 1 × 230 V, 50/60 Hz
- energy efficiency index EEI 0.19
- installation length 130 mm, body with G 1" (DN 15) thread
- weight 1.9 kg
Functions
- nine modes on a single button – proportional pressure (PP1–PP3), constant pressure (CP1–CP3) and fixed curves (I–III)
- the display shows the selected mode, current power input, head and flow rate
- automatic air venting at the push of a button: the pump then runs at maximum speed for one minute
- self-protection against overload, phase loss, overheating, overvoltage and undervoltage, alarm on dry running
- according to the manufacturer it is also suitable for replacing old three-speed pumps
Operating conditions
- liquid temperature −10 to +110 °C
- max. operating pressure 10 bar
- protection class IPX5, insulation class F
- glycol content max. 30 %
- ambient temperature max. +40 °C
- installation with the motor shaft in a horizontal position
The cast-iron body has a cataphoretic coating and the jacket is made of stainless steel. The pump has an air-vent plug and allows manual release of the motor shaft; the electronics are watertight with IPX5 protection.
Technical data
| Code | 60186091 |
| Brand | DAB |
| Type | DAB.EVOSTA3 |
| Model | EVOSTA3 80/130 (1/2") |
| Max. head | 8 m |
| Max. flow rate | 4.2 m³/h |
| Max. power input P1 | 55 W |
| Connection | G 1" thread (DN 15) |
| Installation length | 130 mm |
| Energy efficiency index (EEI) | 0.19 |
| Liquid temperature | −10 … +110 °C |
| Max. operating pressure | 10 bar |
| Power supply | 1 × 230 V, 50/60 Hz |
| Protection class / insulation class | IPX5 / F |
| Weight | 1.9 kg |
Frequently asked questions
Can the EVOSTA3 80/130 (1/2") replace an old three-speed pump?
The manufacturer states that the EVOSTA3 range has the same installation length and connection as old three-speed pumps, so it is suitable for replacing them. For this model that means an installation length of 130 mm and a G 1" thread.
What modes does the EVOSTA3 80/130 (1/2") have and how are they changed?
It has nine modes: three proportional pressure curves (PP1–PP3), three constant pressure curves (CP1–CP3) and three fixed curves (I–III). The mode is changed with the button on the pump and the current mode is shown on the display.
Do I have to vent the pump before starting it?
No, the pump vents itself; noise caused by air in the pump should disappear after a few minutes. You can start the automatic venting function with the button, after which the pump runs at maximum speed for one minute.
Additional parameters
| Category: | DAB.EVOSTA2 - Electronic Circulation Pumps for Heating/Air-Conditioning |
|---|---|
| Warranty: | 2 years |
| Weight: | 1.9 kg |
| Code: | 60186091 |
| Brand: | DAB |
| Type: | DAB.EVOSTA3 |
| Model: | EVOSTA3 80/130 (1/2") |
| Max. head: | 8 m |
| Max. flow rate: | 4.2 m³/h |
| Max. power input P1: | 55 W |
| Connection: | G 1" thread (DN 15) |
| Installation length: | 130 mm |
| Energy efficiency index (EEI): | 0.19 |
| Liquid temperature: | −10 … +110 °C |
| Max. operating pressure: | 10 bar |
| Power supply: | 1 × 230 V, 50/60 Hz |
| Protection class / insulation class: | IPX5 / F |
| Weight: | 1.9 kg |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!
