DAB FEKA FXC 25 22 – submersible sewage pump, 3 × 400 V, 20 m cable
Code: 60219512Product detailed description
FEKA FXC 25 22 (code 60219512) is a DAB submersible sewage pump from the FEKA FXC range for pumping wastewater from sewers, commercial premises and building sites. The channel impeller has a free passage of 50 mm and the pump is certified to EN 12050-2 for wastewater.
Version of this code
- three-phase version 3 × 400 V, 50 Hz, motor protection is provided by the user
- power cable length 20 m
Design and use
The pump is suitable for fixed installation with a lifting device as well as for portable use directly on the bottom of the tank. It handles dirty water, rainwater and sandy water from building sites that contains no long fibres. The double mechanical seal of silicon carbide sits in an oil chamber, away from contact with the pumped liquid, the motor shaft is made of AISI 304 stainless steel and the cable entry is sealed with resin.
Operating conditions
- liquid temperature up to +50 °C, briefly up to +60 °C
- protection class IP68, motor insulation class F
- maximum immersion depth 7 m
- dry running max. 10 minutes
According to the manufacturer the FXC range reaches a flow rate of up to 71.4 m³/h and a head of up to 19.3 m; these figures apply to the whole range, not to every model. The design gives quick access to the main parts for maintenance. Leave installation and electrical connection to a specialist.
Technical data
| Code | 60219512 |
| Brand | DAB |
| Type | DAB.FEKA FXC |
| Model | FEKA FXC 25 22 |
| Version | three-phase, 3 × 400 V, 50 Hz |
| Power cable | 20 m |
| Free passage | 50 mm |
| Liquid temperature | up to +50 °C (+60 °C for short periods) |
| Protection class / insulation class | IP68 / F |
| Max. immersion depth | 7 m |
| Max. dry running time | 10 min |
| Impeller | channel |
| Standard | EN 12050-2 |
Frequently asked questions
What does the cable length in the name of the FEKA FXC 25 22 pump mean?
The pump is three-phase (3 × 400 V, 50 Hz) and is supplied with a 20 m power cable. On request the manufacturer also makes other cable lengths, voltages and frequencies.
What can the pump handle?
It is intended for dirty water, rainwater and sandy water from building sites with a free passage of up to 50 mm. It is not suitable for wastewater containing long fibres.
Can the pump run dry?
For 10 minutes at most. The pump is designed for continuous operation below the liquid level, and the maximum immersion depth is 7 m.
Additional parameters
| Category: | DAB.FEKA - submersible sewage pumps |
|---|---|
| Warranty: | 2 years |
| Code: | 60219512 |
| Brand: | DAB |
| Type: | DAB.FEKA FXC |
| Model: | FEKA FXC 25 22 |
| Version: | three-phase, 3 × 400 V, 50 Hz |
| Power cable: | 20 m |
| Free passage: | 50 mm |
| Liquid temperature: | up to +50 °C (+60 °C for short periods) |
| Protection class / insulation class: | IP68 / F |
| Max. immersion depth: | 7 m |
| Max. dry running time: | 10 min |
| Impeller: | channel |
| Standard: | EN 12050-2 |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!
