DAB FEKA VS 550 M-A – submersible sewage pump, 1x230 V, with float switch
Code: 60219347HProduct detailed description
DAB FEKA VS 550 M-A is an all-stainless-steel submersible sewage pump with a precision-cast vortex impeller. It is designed to remove non-aggressive wastewater, sewage and sludge containing solids up to 50 mm in diameter.
Key features
- The pump body, motor shell, terminal box cover and handle are made of AISI 304 stainless steel; the handle has an insulating rubber coating.
- The shaft is sealed by a double mechanical seal with non-toxic oil filling: carbon/ceramic on the motor side, silicon carbide on the pump side.
- The dry two-pole asynchronous motor is hermetically sealed and cooled by immersion in the pumped liquid; protection IP68, insulation class F.
- The H07RN-F supply cable is 10 m long; the single-phase version ends in a Schuko plug.
- For the whole FEKA VS series the manufacturer states an operating range of 3 to 39 m³/h and a head of up to 17 m; the exact duty point depends on the model.
- Liquid temperature may be 0 to +35 °C for domestic use and 0 to +50 °C for other use. The pump is installed fixed or portable in a vertical position.
This version
Designation FEKA VS 550 M-A: single-phase motor 1x230 V, with float switch. In the FEKA VS series M means a single-phase and T a three-phase motor, A a float switch for automatic operation and NA a version without float.
Electrical connection and commissioning should be carried out by a qualified person.
Technical data
| Code | 60219347H |
| Manufacturer | DAB |
| Type | DAB FEKA VS 550 M-A |
| Supply | 1x230 V, 50 Hz |
| Float switch | yes, automatic operation |
| Solids passage | solids up to 50 mm |
| Material | AISI 304 stainless steel |
| Protection / insulation | IP68 / F |
| Supply cable | 10 m H07RN-F (single-phase version with Schuko plug) |
| Liquid temperature | 0 to +50 °C (domestic use up to +35 °C) |
Frequently asked questions
What do the designations M-A, M-NA and T-NA mean?
M is a single-phase and T a three-phase motor. A means a float switch for automatic switching, NA a version without float.
How large can the solid particles be?
According to the manufacturer the pump passes solids up to 50 mm in diameter. It is intended for non-aggressive wastewater and sewage.
Can the pump run continuously?
The data sheet of the series states continuous operation when the pump is fully submerged in liquid at up to 35 °C.
Additional parameters
| Category: | DAB.FEKA - submersible sewage pumps |
|---|---|
| Warranty: | 2 years |
| Code: | 60219347H |
| Manufacturer: | DAB |
| Type: | DAB FEKA VS 550 M-A |
| Supply: | 1x230 V, 50 Hz |
| Float switch: | yes, automatic operation |
| Solids passage: | solids up to 50 mm |
| Material: | AISI 304 stainless steel |
| Protection / insulation: | IP68 / F |
| Supply cable: | 10 m H07RN-F (single-phase version with Schuko plug) |
| Liquid temperature: | 0 to +50 °C (domestic use up to +35 °C) |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!
