DAB JET 251 M – self-priming centrifugal pump, 1x220–240 V, 1.85 kW
Code: 102160092Product detailed description
DAB JET 251 M is a self-priming centrifugal pump with a cast-iron body, built-in ejector and a single impeller. It suits household water supply, small agricultural and horticultural systems and anywhere self-priming ability is required.
Key features
- The single impeller also drives the built-in ejector, which lets the pump draw water even when the suction line contains air; total suction lift is 8 m at most.
- The impeller, diffuser and ejector are technopolymer, the body is cast iron, the motor shaft is stainless steel; the shaft is sealed by a carbon/ceramic mechanical seal.
- Closed asynchronous motor with external ventilation: motor protection IP44, terminal box IP55, insulation class F; the single-phase version has a built-in capacitor and winding thermal protection.
- The JET series covers a flow of 0.4 to 10.5 m³/h and a head of up to 61 m; the maximum working pressure of this model is 8 bar.
- The pumped liquid must be clean, free of solid and abrasive particles, non-aggressive and non-viscous; temperature 0 to +35 °C for domestic use, 0 to +40 °C for other use.
- Installation is fixed or portable in a horizontal position; the rated motor output P2 is 1.85 kW.
This version
Designation JET 251 M: single-phase motor 1x220–240 V; the rated motor output P2 is 1.85 kW.
Electrical connection and commissioning should be carried out by a qualified person.
Technical data
| Code | 102160092 |
| Manufacturer | DAB |
| Type | DAB JET 251 M |
| Supply | 1x220–240 V, 50 Hz |
| Rated output P2 | 1.85 kW |
| Max. suction lift | 8 m |
| Max. working pressure | 8 bar |
| Protection / insulation | IP44 / F |
| Liquid temperature | 0 to +35 °C (domestic use), 0 to +40 °C (other use) |
| Installation | fixed or portable, horizontal position |
| Body material | cast iron |
Frequently asked questions
What do the designations M and T mean?
M is a single-phase 220–240 V motor, T a three-phase 230–400 V motor. A three-phase motor must be protected against overload in the electrical installation.
What can the pump handle?
Clean water without solid and abrasive matter, non-aggressive and non-viscous. It is not intended for sludge or wastewater.
How large can the suction lift be?
The total suction lift is 8 m at most; the built-in ejector lets the pump draw even when the suction line contains air.
Additional parameters
| Category: | DAB.JET,JETCOm,JETINOX - Self-priming pumps |
|---|---|
| Warranty: | 2 years |
| Code: | 102160092 |
| Manufacturer: | DAB |
| Type: | DAB JET 251 M |
| Supply: | 1x220–240 V, 50 Hz |
| Rated output P2: | 1.85 kW |
| Max. suction lift: | 8 m |
| Max. working pressure: | 8 bar |
| Protection / insulation: | IP44 / F |
| Liquid temperature: | 0 to +35 °C (domestic use), 0 to +40 °C (other use) |
| Installation: | fixed or portable, horizontal position |
| Body material: | cast iron |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!
