DAB K 66/100 T – two-stage centrifugal pump with two opposed impellers, three-phase

Code: 60179857
Not rated Rating details
1 342,19 € –20 %
DAB K 66/100 T – dvojstupňové odstredivé čerpadlo s dvomi protiľahlými obežnými kolesami, trojfázové
1 342,19 € –20 % 1 073,75 € / pcs 872,97 € excl. VAT Measure price:
International delivery
In stock at supplier

Detailed information

Product detailed description

The DAB K 66/100 T (code 60179857) belongs to the DAB.K range of horizontal centrifugal pumps with two opposed impellers. The cast iron body has two volutes separated by an intermediate wall, so the water passes through two stages one after the other. The K range is used for water supply to houses and small to medium-sized premises, in pressure boosting units, for irrigation, filling and emptying tanks, and in heating and cooling systems.

Design

  • radial impellers in technopolymer
  • carbon/ceramic mechanical seal
  • enclosed three-phase asynchronous motor with external fan cooling, motor protection IP44, terminal box IP55, insulation class F
  • 6/4" suction port, 1" delivery port

Installation and operation

The pump is firmly anchored to a base plate with the shaft horizontal, in a place protected from the weather, at an ambient temperature of up to +40 °C. Before start-up the pump body and suction pipe must be filled with water – dry running damages the seal. When drawing from a tank, fit a suction strainer with a non-return flap on the suction side. With a three-phase motor, check the direction of rotation (clockwise seen from the fan end) and install overload protection. The pump should not be started more than 20 times per hour. The electrical connection may only be made by a suitably qualified person.

Pumped liquid

Clean water without solid or abrasive substances, non-aggressive, non-viscous, non-crystallising and chemically neutral, at a temperature of −15 to +110 °C. The whole range covers flow rates from 1.2 to 30 m³/h and heads of up to 97 m; the hydraulic and electrical data of the individual unit are given on the pump's rating plate.

Technical data

Code60179857
ManufacturerDAB
TypeDAB.K
ModelK 66/100 T
Designhorizontal, two-stage, 2 opposed impellers
Motorthree-phase asynchronous
Suction port6/4"
Delivery port1"
Body materialcast iron
Impellerstechnopolymer
Mechanical sealcarbon / ceramic
Liquid temperature−15 to +110 °C
Protection motor / terminal boxIP44 / IP55
Insulation classF

Frequently asked questions

What is the K 66/100 T pump suitable for?
For pumping clean water – supply to houses and small to medium-sized premises, pressure boosting units, irrigation, filling and emptying tanks, and heating and cooling circuits. The water may be at −15 to +110 °C.

Which pipes are connected to the pump?
The suction port is 6/4" and the delivery port 1". For suction lifts of more than 4 m, a suction pipe with a larger bore than the pump port is recommended.

What should be checked at the first start-up?
The pump body and suction pipe must be filled with water, because dry running damages the mechanical seal. With a three-phase motor, check the direction of rotation – clockwise seen from the fan end.

Additional parameters

Category: DAB.K - pumps with 2 opposed impellers
Warranty: 2 years
Code: 60179857
Manufacturer: DAB
Type: DAB.K
Model: K 66/100 T
Design: horizontal, two-stage, 2 opposed impellers
Motor: three-phase asynchronous
Suction port: 6/4"
Delivery port: 1"
Body material: cast iron
Impellers: technopolymer
Mechanical seal: carbon / ceramic
Liquid temperature: −15 to +110 °C
Protection motor / terminal box: IP44 / IP55
Insulation class: F

Product rating

Be the first who will post an article to this item!

Do not fill out this field

How would you rate this product? Choose 1 to 5 stars, where 1 is the worst and 5 is the best rating.

Discussion

Be the first who will post an article to this item!

Do not fill out this field
Vytvořil Shoptet | Design Shoptak.cz.