DAB priming tank 500 l for fire-fighting booster sets according to EN 12845
Code: 60110538Product detailed description
What the priming tank is for
DAB automatic fire-fighting booster sets according to EN 12845 supply fixed sprinkler systems in buildings. If the pumps draw water from a tank located below them (suction-lift configuration with negative suction head, which must be less than 3.2 m), each main pump needs its own priming tank. It keeps the pump flooded while idle and compensates for possible leaks in the suction pipe fittings, so that the pump is ready for operation.
Connection
The tank is connected to the port on the delivery pipe of the main pump, which the sets provide specifically for the suction-lift configuration. It is refilled from the mains; the control panel of the set is prepared for the tank float, which starts and stops the pump during refilling. The tank capacity is 500 l.
The priming tank is an accessory and is not part of the standard supply of the fire-fighting set. Design and installation of the sprinkler system must comply with EN 12845 and be carried out by an authorised specialist company.
Technical data
| Code | 60110538 |
| Manufacturer | DAB |
| Type | DAB.PRISLUSENSTVI ATS |
| Product type | priming tank |
| Capacity | 500 l |
| Standard | EN 12845 |
| Application | DAB fire-fighting booster sets in suction-lift configuration |
| Quantity | 1 tank for each main pump |
Frequently asked questions
When is a priming tank needed?
For a fire-fighting set according to EN 12845 in suction-lift configuration, when the pumps are above the water level in the tank. In that case each main pump needs a priming tank.
What does the tank do?
It keeps the main pump flooded with water while idle and compensates for possible leaks in the suction pipe fittings, so the pump is ready to start.
Is the tank included with the fire-fighting set?
No, it is ordered separately as an accessory of the set.
Additional parameters
| Category: | DAB. Priming Tank |
|---|---|
| Warranty: | 2 years |
| Code: | 60110538 |
| Manufacturer: | DAB |
| Type: | DAB.PRISLUSENSTVI ATS |
| Product type: | priming tank |
| Capacity: | 500 l |
| Standard: | EN 12845 |
| Application: | DAB fire-fighting booster sets in suction-lift configuration |
| Quantity: | 1 tank for each main pump |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!
