DAB.EVOPLUS B 60/340.65 M, flanged DN 65, for heating and air conditioning
Code: 60150978Product detailed description
DAB.EVOPLUS B 60/340.65 M (code 60150978) is a wet rotor circulation pump with a synchronous motor with permanent magnets, the speed of which is controlled by a frequency converter. It belongs to the EVOPLUS range intended for larger heating, ventilation and air conditioning systems – apartment and single-family houses, schools, hospitals or administrative buildings. This model has a simple flanged version with a single-phase motor, DN 65 connection and a construction length of 340 mm.
Performance of the EVOPLUS B 60/340.65 M model
The pump achieves a delivery head of up to 6 m and a flow rate of up to 34.47 m³/h, with a maximum input power P1 of 355 W. With an energy efficiency index EEI ≤ 0.20, it complies with the ErP 2009/125/ES directive. The electronics continuously evaluates changes in the system hydraulics, for example when opening and closing individual branches, and adjusts the speed accordingly – the circuit receives the required flow without unnecessary energy consumption.
Control and connection to the control system
- proportional (Δp-v) or constant (Δp-c) differential pressure, constant curve and regulation depending on the fluid temperature
- economical function and remote switching on and off
- inputs for an analogue signal 0–10 V or 4–20 mA, PWM signal and temperature sensor, output for fault indication
- ModBus communication, LonBus with an additional module
- OLED display and three buttons on the control panel
Construction
The pump body is made of cast iron, the impeller is made of technopolymer and the stainless steel shaft rotates in ceramic bearings lubricated by the pumped fluid; the motor housing is made of pressure-cast aluminium. The suction and discharge nozzles have threaded connections for pressure and temperature measurement. Thermal insulation of the body is part of the delivery – it reduces heat losses and condensation formation, so the pump can also handle cooling circuits with a fluid colder than the environment. The motor does not require external protection: the electronics protects it against overload, overheating, phase failure and overvoltage and undervoltage.
Installation and operating conditions
The pump must always be installed with the motor shaft in a horizontal position, the control electronics must be in a vertical position and must not be insulated. The pumped fluid must be clean, free of solid particles and mineral oils, with a glycol content of no more than 30 % and a temperature from −10 to +110 °C; the ambient temperature must be no more than 40 °C. The maximum operating pressure is 16 bar and at least 10 m of water column must be maintained on the suction side at 90 °C, or 20 m of water column at 110 °C. Flanges DN 65 PN 10 are not part of the packaging, they are supplied on request. The cast iron version is not suitable for potable water. Electrical connection (1 × 220–240 V, 50/60 Hz) and commissioning must be carried out by a qualified person.
Technical parameters
| Code | 60150978 |
| Manufacturer | DAB |
| Type | DAB.EVOPLUS B 60/340.65 M |
| Version | simple flanged, single-phase motor |
| Connection | flanges DN 65 |
| Construction length | 340 mm |
| Max. delivery head | 6 m |
| Max. flow rate | 34.47 m³/h |
| Max. input power P1 | 355 W |
| Energy efficiency index | EEI ≤ 0.20 |
| Power supply | 1 × 220–240 V, 50/60 Hz |
| Protection / insulation class | IP44 / F |
| Fluid temperature | −10 to +110 °C |
| Max. operating pressure | 16 bar |
| Weight | 20 kg |
Frequently asked questions
What does the designation EVOPLUS B 60/340.65 M mean?
B denotes a simple flanged version, 60 is the maximum delivery head in decimetres (6 m), 340 is the construction length in millimetres and 65 is the nominal flange size DN 65. The letter M means a single-phase motor 220–240 V.
Are the flanges part of the packaging?
No, flanges DN 65 PN 10 are supplied on request with the pump. Thermal insulation of the body is included in the packaging, however.
Which Grundfos pump can be replaced by this model?
The comparison table in the IVAR technical data sheet lists EVOPLUS B 60/340.65 M as equivalent to Grundfos MAGNA 65-60 F, MAGNA 1 65-60 F, MAGNA 3 65-60 F and UPS 65-60/2 F. Before replacement, please check the construction length, flange and system operating point.
In which position is the pump installed?
Always so that the motor shaft is horizontal and the control electronics is vertical. Do not insulate the electronics and do not cover the condensate discharge openings.
Additional parameters
| Category: | DAB.EVOPLUS - electronic circulation pumps for larger heating/air conditioning |
|---|---|
| Warranty: | 2 years |
| Weight: | 20 kg |
| Availability: | In stock or at supplier |
| Code: | 60150978 |
| Manufacturer: | DAB |
| Type: | DAB.EVOPLUS B 60/340.65 M |
| Version: | single flanged, single-phase motor |
| Connection: | DN 65 flanges |
| Installation length: | 340 mm |
| Max. head: | 6 m |
| Max. flow: | 34.47 m³/h |
| Max. power input P1: | 355 W |
| Energy efficiency index: | EEI ≤ 0.20 |
| Power supply: | 1 × 220–240 V, 50/60 Hz |
| Protection rating / insulation class: | IP44 / F |
| Fluid temperature: | −10 to +110 °C |
| Max. operating pressure: | 16 bar |
| Weight: | 20 kg |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!
