IVAR.SWITCHON dual relay switch 230 V with Wi-Fi and the Seitron Smart app
Code: GS001MRelated products
Product detailed description
IVAR.SWITCHON (GS001M) is a white box with two relay outputs that you control from your phone. In the Seitron Smart app (Android and iOS) you switch the connected devices on and off remotely and give them a weekly schedule – for example electric shutters, irrigation, lighting or any other low-power load.
Two operating modes
- IoT relay switch: outputs OUT 1 and OUT 2 are switched over Wi-Fi from the app or with the buttons on the unit.
- Witime receiver: the switch can be paired with up to six Witime thermostats and carries out their commands.
Key technical data
- supply 95–290 V AC, consumption below 2 W
- two volt-free changeover contacts, each 3 A at 250 V AC or 3 A at 30 V DC
- Wi-Fi 802.11 b/g/n, protection rating IP 3X, dimensions 125 × 78 × 30.5 mm
Wiring must be done only by a qualified person and always with the power disconnected. The base is fixed to the wall with two screws 60 mm apart.
Technical data
| Code | GS001M |
| Manufacturer | Seitron / IVAR |
| Type | IVAR.SWITCHON |
| Device type | IoT relay switch / Witime receiver |
| Supply | 95–290 V AC, 47–440 Hz |
| Consumption | below 2 W |
| Outputs | 2 × changeover contact, volt-free |
| Contact rating | 3 A / 250 V AC, 3 A / 30 V DC |
| Communication | Wi-Fi 802.11 b/g/n |
| App | Seitron Smart (Android, iOS) |
| Pairable Witime thermostats | up to 6 |
| Protection rating | IP 3X |
| Dimensions | 125 × 78 × 30.5 mm |
Frequently asked questions
What can this switch control?
Up to two low-power devices remotely through the Seitron Smart app, for example electric shutters, irrigation or lighting. Switching on and off can be scheduled on a weekly basis.
Can it be linked to Witime thermostats?
Yes, in receiver mode it can be paired with up to six Witime thermostats and carries out their commands.
Who may install it?
Installation and electrical connection must be done by a qualified person with the power disconnected. The base is fixed to the wall with two screws 60 mm apart.
Additional parameters
| Category: | wireless thermostats |
|---|---|
| Warranty: | 24 |
| Code: | GS001M |
| Manufacturer: | Seitron / IVAR |
| Type: | IVAR.SWITCHON |
| Device type: | IoT relay switch / Witime receiver |
| Supply: | 95–290 V AC, 47–440 Hz |
| Consumption: | below 2 W |
| Outputs: | 2 × changeover contact, volt-free |
| Contact rating: | 3 A / 250 V AC, 3 A / 30 V DC |
| Communication: | Wi-Fi 802.11 b/g/n |
| App: | Seitron Smart (Android, iOS) |
| Pairable Witime thermostats: | up to 6 |
| Protection rating: | IP 3X |
| Dimensions: | 125 × 78 × 30.5 mm |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!
IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.
Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.
Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.
“Made in Italy” adds value
IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.
The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.
Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.
The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.
As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.
