Elbow 45° - C - 108mm
Code: IVC22.108Related products
Product detailed description
Elbow 45° FF, IVAR.IVC22, size: 108 x 108, pack: 1 pcs
- PN 16, T = -20 °C to +85 °C - max. +120 °C
- 45° elbow, PRESS x PRESS
- intended use: for heating systems, permanently flooded sprinkler systems,
pressurized dry air, inert gases and industry - material: carbon galvanized steel, EPDM O-ring
- Compatible with type M pressing jaws
Note: Does not contain substances that would impair the surface coating; not tight unless properly pressed
and features a press indicator up to size 54 mm.
Possible uses
- installation of central heating pipework in a closed (pressurized) system
- installation of cold water and cooling pipework
- installation of fire-fighting water pipework
- installation of air-conditioning pipework
- installation of pipework for solar systems
Advantages
- fast and safe installation without welding or making threaded joints
- wide range of pipe and fitting diameters from 15 mm up to 108 mm
- wide operating temperature range from -20 °C to +180 °C
- resistance to high pressures up to 16 bar
- possibility of combining with other systems
- low weight of pipes and fittings
- high aesthetic quality of installation
- resistance to mechanical damage
The pipe is not certified for drinking water.
Frequently Asked Questions
- What is this pipe intended for? The exact intended use (water supply, heating, gas, solar systems, compressed air, etc.) can be found in the description and technical parameters of this product - different materials (stainless steel, carbon steel) have different corrosion resistance and are certified for different media.
- How is this pipe connected? Usually by press fittings or welded joints, depending on the specific system and diameter - make sure to use compatible fittings of the same system.
- Must the installation be done by a professional? Yes, especially for gas piping, compressed air lines, or welded joints, the installation is reserved for a person with the appropriate professional qualification.
Additional parameters
| Category: | IVAR.IVC22 - 45° FF press elbows |
|---|---|
| Warranty: | 2 years |
| Weight: | 1.61 kg |
| Material type: | galvanized carbon steel |
| Operating temperature: | -20 °C |
| High-pressure resistance up to: | 16 bar |
| Nominal pressure: | PN 16 |
| Last price update: | 13.04.2026 1:05:11 |
Product rating
Be the first who will post an article to this item!
Discussion
List of discussions
R
Rastislav
Rastislav
Chcel by som sa informovať, či je tento oblúk 45° s rozmerom 108 mm určený výhradne pre press fitingový systém IVAR, alebo je možné ho použiť aj v kombinácii s inými press systémami od iných výrobcov, ktoré pracujú s rovnakým priemerom potrubia.
A
ATRIA.SK
ATRIA.SK
Tento oblúk patrí do press systému IVAR.IVC22, takže odporúčame používať ho výhradne s ostatnými komponentmi tejto série. Kombinovanie rôznych press systémov od rôznych výrobcov sa bežne neodporúča, aj keď priemer sedí – tesnenia a geometria lisovacích profilov sa môžu líšiť. Pre istotu si pozrite ostatné fitingy z kategórie IVAR.IVC22, kde nájdete kompatibilné kusy.