Electric actuator BRA.003 for BRA valves – 24 V DC, ON/OFF, 30 Nm
Code: BRA-003.024Product detailed description
Actuator for BRANDONI shut-off valves
The BRA.003 is a compact electric actuator with a 90° rotation angle, intended for operating BRANDONI wafer butterfly valves and flanged or threaded ball valves. Version BRA-003.024 delivers a torque of 30 Nm on 24 V DC and connects to the valve through an ISO 5211 flange. It works in ON/OFF mode – the valve is either fully opened or fully closed (S2-15 min duty, at most 600 starts per hour).
Features
- anodised aluminium housing with a powder-coated finish, weather resistant
- IP 68 protection – safe even when temporarily submerged
- four potential-free limit switch contacts (2 limit + 2 auxiliary, SPDT 250 V AC / 10 A) on the terminal block for remote signalling
- adjustable mechanical stops and a visual position indicator
- thermal overload protection (the contact opens at +120 °C)
- manual override with the hex key stored in the actuator
- operating time 20 s / 90°, current 1,1 A, power consumption 8 W, weight 2,1 kg
Selection and connection
When choosing the actuator, the manufacturer recommends multiplying the valve's operating torque by a safety factor of 1.5. The electrical connection may only be made by a qualified electrician; the wiring is described in the manufacturer's data sheet.
Technical data
| Code | BRA-003.024 |
| Manufacturer | IVAR |
| Type | BRA.003 |
| Torque | 30 Nm |
| Supply | 24 V DC |
| Control | ON/OFF |
| Operating time | 20 s / 90° |
| Power / current | 8 W / 1,1 A |
| Rotation angle | 90° ±10 % |
| Protection rating | IP 68 |
| Limit switches | 2 + 2 auxiliary, SPDT 250 V AC / 10 A |
| Ambient temperature | -25 to +70 °C |
| Cable gland | M12 × 1,5 |
| Weight | 2,1 kg |
Frequently asked questions
Which valves can the actuator be mounted on?
On BRANDONI wafer butterfly valves and flanged or threaded ball valves with an ISO 5211 connection. When sizing, the manufacturer advises multiplying the valve's operating torque by 1.5; BRA-003.024 delivers 30 Nm.
How does it differ from the version with the letter P in the code?
This actuator works in ON/OFF mode (open/closed). Actuators with the letter P at the end of the code have modulating control with a 0–10 V signal.
Can the actuator also be operated by hand?
Yes, it has a manual mode. The valve can be moved with the hex key stored right in the actuator.
Additional parameters
| Category: | stainless steel and flanged fittings |
|---|---|
| Warranty: | 2 years |
| Weight: | 2.1 kg |
| Code: | BRA-003.024 |
| Manufacturer: | IVAR |
| Type: | BRA.003 |
| Torque: | 30 Nm |
| Supply: | 24 V DC |
| Control: | ON/OFF |
| Operating time: | 20 s / 90° |
| Power / current: | 8 W / 1,1 A |
| Rotation angle: | 90° ±10 % |
| Protection rating: | IP 68 |
| Limit switches: | 2 + 2 auxiliary, SPDT 250 V AC / 10 A |
| Ambient temperature: | -25 to +70 °C |
| Cable gland: | M12 × 1,5 |
| Weight: | 2,1 kg |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!
IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.
Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.
Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.
“Made in Italy” adds value
IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.
The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.
Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.
The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.
As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.
