Electric actuator BRA.003 for BRA valves – 24 V DC, 0–10 V control, 30 Nm

Code: BRA-003.024P
Not rated Rating details
2 071,32 € –20 %
Elektrický pohon BRA.003 pre armatúry BRA – 24 V DC, riadenie 0–10 V, 30 Nm
2 071,32 € –20 % 1 657,06 € / pcs 1 347,20 € excl. VAT Measure price:
International delivery
To order (1-2 weeks)

Detailed information

Product detailed description

Actuator for BRANDONI shut-off valves

The BRA.003 is a compact electric actuator with a 90° rotation angle, intended for operating BRANDONI wafer butterfly valves and flanged or threaded ball valves. Version BRA-003.024P delivers a torque of 30 Nm on 24 V DC and connects to the valve through an ISO 5211 flange. This is the modulating version (letter P in the code), controlled by a continuous 0–10 V signal; it handles S4-25 % duty and at most 1200 starts per hour.

Features

  • anodised aluminium housing with a powder-coated finish, weather resistant
  • IP 68 protection – safe even when temporarily submerged
  • four potential-free limit switch contacts (2 limit + 2 auxiliary, SPDT 250 V AC / 10 A) on the terminal block for remote signalling
  • adjustable mechanical stops and a visual position indicator
  • thermal overload protection (the contact opens at +120 °C)
  • manual override with the hex key stored in the actuator
  • operating time 20 s / 90°, current 1,1 A, power consumption 8 W, weight 2,1 kg

Selection and connection

When choosing the actuator, the manufacturer recommends multiplying the valve's operating torque by a safety factor of 1.5. The electrical connection may only be made by a qualified electrician; the wiring is described in the manufacturer's data sheet.

Technical data

CodeBRA-003.024P
ManufacturerIVAR
TypeBRA.003
Torque30 Nm
Supply24 V DC
Controlmodulating 0–10 V
Operating time20 s / 90°
Power / current8 W / 1,1 A
Rotation angle90° ±10 %
Protection ratingIP 68
Limit switches2 + 2 auxiliary, SPDT 250 V AC / 10 A
Ambient temperature-25 to +70 °C
Cable glandM12 × 1,5
Weight2,1 kg

Frequently asked questions

Which valves can the actuator be mounted on?
On BRANDONI wafer butterfly valves and flanged or threaded ball valves with an ISO 5211 connection. When sizing, the manufacturer advises multiplying the valve's operating torque by 1.5; BRA-003.024P delivers 30 Nm.

Which signal controls the actuator?
The modulating version with the letter P in the code is controlled by a continuous 0–10 V signal on 24 V DC supply. It handles at most 1200 starts per hour (S4-25 % duty).

Can the actuator also be operated by hand?
Yes, it has a manual mode. The valve can be moved with the hex key stored right in the actuator.

Additional parameters

Category: stainless steel and flanged fittings
Warranty: 2 years
Weight: 2.1 kg
Code: BRA-003.024P
Manufacturer: IVAR
Type: BRA.003
Torque: 30 Nm
Supply: 24 V DC
Control: modulating 0–10 V
Operating time: 20 s / 90°
Power / current: 8 W / 1,1 A
Rotation angle: 90° ±10 %
Protection rating: IP 68
Limit switches: 2 + 2 auxiliary, SPDT 250 V AC / 10 A
Ambient temperature: -25 to +70 °C
Cable gland: M12 × 1,5
Weight: 2,1 kg

Product rating

Be the first who will post an article to this item!

Do not fill out this field

How would you rate this product? Choose 1 to 5 stars, where 1 is the worst and 5 is the best rating.

Discussion

Be the first who will post an article to this item!

Do not fill out this field

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

“Made in Italy” adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.