Electric actuator BRA.005 for BRA valves – 230 V AC, ON/OFF, 50 Nm
Code: BRA-005.230Product detailed description
Actuator for BRA shut-off valves
The BRA.005 is an electric actuator with a 90° rotation angle for operating BRANDONI wafer butterfly valves and flanged or threaded ball valves from the IVAR range. Powered by 230 V AC, it delivers 50 Nm of torque and mounts on the valve via an ISO 5211 flange. The actuator works in ON/OFF mode, fully opening or closing the valve; it is rated for S2-15 min duty and a maximum of 600 starts per hour.
Features
- anodised aluminium housing, polyester powder-coated and weatherproof
- IP 68 protection – protected even against temporary immersion
- 4 limit switch contacts (2 limit + 2 auxiliary, SPDT 250 V AC / 10 A), volt-free on the terminal block for remote signalling
- adjustable mechanical stops and visual position indicator
- thermal overload protection (opens at +120 °C)
- manual operation with an Allen key stored in the actuator
- operating time 30 s/90°, current 0.25 A, power 10 W, weight 3.6 kg
Combining with valves
In ready-made IVAR sets, 50 Nm actuators are combined for example with: BRA.B2.100 flanged ball valve DN 40 / DN 50; BRA.J9.100 wafer butterfly valve DN 65 / DN 80; BRA.B3.622 threaded ball valve 6/4" / 2". When selecting an actuator, the manufacturer recommends multiplying the valve's operating torque by a safety factor of 1.5. Connection to 230 V must be carried out by a qualified electrician only.
Technical data
| Code | BRA-005.230 |
| Manufacturer | IVAR |
| Type | BRA.005 |
| Torque | 50 Nm |
| Power supply | 230 V AC ±10 %, 50/60 Hz |
| Control | ON/OFF |
| Operating time | 30 s / 90° |
| Power / current | 10 W / 0.25 A |
| Rotation angle | 90° ±10 % |
| Protection | IP 68 |
| Limit switches | 2 + 2 auxiliary, SPDT 250 V AC / 10 A |
| Ambient temperature | -25 to +70 °C |
| Cable gland | M20 × 1.5 |
| Weight | 3.6 kg |
Frequently asked questions
Which valves does the actuator fit?
BRA wafer butterfly valves and flanged or threaded ball valves with an ISO 5211 connection. In IVAR sets the 50 Nm version is used for example with: BRA.B2.100 flanged ball valve DN 40 / DN 50; BRA.J9.100 wafer butterfly valve DN 65 / DN 80; BRA.B3.622 threaded ball valve 6/4" / 2".
How does it differ from the version with P in the code?
This actuator works in ON/OFF mode (open/closed). Actuators with the letter P at the end of the code have modulating 0–10 V control.
Can the actuator be operated by hand?
Yes, the actuator has a manual mode. The valve is turned with the Allen key stored directly in the actuator.
Additional parameters
| Category: | stainless steel and flanged fittings |
|---|---|
| Warranty: | 2 years |
| Weight: | 3.6 kg |
| Code: | BRA-005.230 |
| Manufacturer: | IVAR |
| Type: | BRA.005 |
| Torque: | 50 Nm |
| Power supply: | 230 V AC ±10 %, 50/60 Hz |
| Control: | ON/OFF |
| Operating time: | 30 s / 90° |
| Power / current: | 10 W / 0.25 A |
| Rotation angle: | 90° ±10 % |
| Protection: | IP 68 |
| Limit switches: | 2 + 2 auxiliary, SPDT 250 V AC / 10 A |
| Ambient temperature: | -25 to +70 °C |
| Cable gland: | M20 × 1.5 |
| Weight: | 3.6 kg |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!
IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.
Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.
Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.
“Made in Italy” adds value
IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.
The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.
Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.
The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.
As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.
