Fancoil IVAR.SL 800 DC – two-pipe version, white RAL 9003, DC Inverter motor – SPECIAL OFFER
Code: FASL08SC1IIProduct detailed description
Heat in winter, cooling in summer
Fancoil IVAR.SL 800 DC delivers energy from water prepared by a heat pump, condensing boiler or solar system into the room – thanks to a powerful heat exchanger, it works well even with low-temperature sources. Air is driven by a very quiet tangential fan with an energy-saving DC Inverter motor, and during cooling the unit also dehumidifies the air.
Model 800 specifications
- heating: 3.81 kW at water 45/40 °C and air 20 °C (water flow 672 l/h)
- cooling: total 3.30 kW, sensible 2.65 kW at water 7/12 °C and air 27 °C
- air flow 567 / 410 / 247 m³/h (max. / medium / min. speed)
- sound pressure 46 / 35 / 26 dB(A)
- power supply 230 V / 50 Hz, max. power consumption 29 W
Construction and installation
The casing made of galvanized and white painted sheet metal (RAL 9003) measures 1335 × 579 × 129 mm (w × h × d, without feet). Air is drawn in from the front and from below, and the air filter can be easily removed and cleaned. The fancoil can be mounted vertically – the condensate tray is included in the delivery – or horizontally with the separately purchased horizontal condensate tray IVAR.FGB. The water connections 3/4" EK are on the left when viewed from the front, and the electricity on the right; the opposite configuration is available upon request.
Order separately
- control – the fancoil does not operate without it; for example, the built-in continuous control IVAR.644 or the control board IVAR.645 with wall controller IVAR.649 are available
- connection kit with 3/4" EK valve
- horizontal condensate tray IVAR.FGB, if you are installing horizontally
The fancoil does not have a condensate pump and it is not needed in a standard installation. Connecting to the heating system and electrical connection 230 V should be entrusted to a specialist.
Technical parameters
| Code | FASL08SC1II |
| Brand | IVAR |
| Type | IVAR.SL DC (IVAR.SL 800 DC) |
| Finishing | two-pipe, white RAL 9003 |
| Heating capacity (45/40 °C) | 3.81 kW |
| Cooling capacity total / sensible (7/12 °C) | 3.30 / 2.65 kW |
| Air flow max. / average / min. | 567 / 410 / 247 m³/h |
| Max. electrical power consumption | 29 W (230 V / 1 / 50 Hz) |
| Sound pressure max. / average / min. | 46 / 35 / 26 dB(A) |
| Connection | 3/4" EK, standardly on the left |
| Max. operating pressure | 10 bar |
| Water volume in the heat exchanger | 1.46 l |
| Dimensions (w × h × d) | 1335 × 579 × 129 mm |
| Net weight | 26 kg |
| Mounting | vertical and horizontal (with condensate tray IVAR.FGB) |
Frequently asked questions
Can I install the IVAR.SL 800 DC fancoil horizontally?
Yes. The condensate tray for vertical mounting is included in the delivery, and for horizontal position you need to order the horizontal condensate tray IVAR.FGB separately.
Is the control and valve included in the packaging?
No. The control and connection kit must be ordered separately – the fancoil does not operate without control. For the SL series, for example, the built-in control IVAR.644 or the control board IVAR.645 with wall controller IVAR.649 are suitable.
Do I need a condensate pump for the fancoil?
The IVAR.SL fancoil does not include a condensate pump and due to its design, it is not needed in standard installations.
Additional parameters
| Category: | IVAR.SLC DC - Fan Coil Unit SL |
|---|---|
| Warranty: | 2 years |
| Weight: | 26 kg |
| Availability: | In stock or at supplier |
| Code: | FASL08SC1II |
| Brand: | IVAR |
| Type: | IVAR.SL DC (IVAR.SL 800 DC) |
| Version: | two-pipe, white RAL 9003 |
| Heating output (45/40 °C): | 3.81 kW |
| Cooling output total / sensible (7/12 °C): | 3.30 / 2.65 kW |
| Air flow max. / med. / min.: | 567 / 410 / 247 m³/h |
| Max. power input: | 29 W (230 V / 1 / 50 Hz) |
| Sound pressure max. / med. / min.: | 46 / 35 / 26 dB(A) |
| Connection: | 3/4" Euroconus, left as standard |
| Max. operating pressure: | 10 bar |
| Water content of exchanger: | 1.46 l |
| Dimensions (W × H × D): | 1335 × 579 × 129 mm |
| Net weight: | 26 kg |
| Installation: | vertical and horizontal (with tray IVAR.FGB) |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!
IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.
Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.
Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.
“Made in Italy” adds value
IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.
The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.
Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.
The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.
As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.