SILENCE fan coil IVAR.EGWW 15 – wall-mounted, two-pipe version – SALE
Code: I07009585Product detailed description
Heating and cooling with one unit
The IVAR.EGWW 15 is the largest model of the SILENCE wall-mounted fan coils. Water from the heating or chilled-water circuit flows through a heat exchanger made of copper tubes with aluminium fins, and a fan driven by a DC motor distributes the treated air into the room. At medium speed the unit delivers 4.10 kW of heat (range 3.50–4.50 kW) or 3.70 kW of cooling (3.10–4.10 kW), of which 2.85 kW is sensible and 0.85 kW latent capacity.
Equipment
- casing made of self-extinguishing plastic and a status display directly on the unit
- three-speed fan with automatic mode
- microprocessor control electronics, activated carbon filter, air vent valve
- infrared remote control – cooling, dehumidifying, ventilation, heating, timer, night mode and louvre adjustment (SWING)
- 230 V output for controlling a motorised water valve
Installation and accessories
The fan coil is mounted on the wall; the heat exchanger is connected on the left side as standard (water 1/2", condensate drain 5/8"). It comes pre-wired with a 1.6 m power cable; electrical and hydraulic connection must be carried out by a qualified person. The water temperature in the exchanger must not exceed 60 °C. The unit can be supplemented with the IVAR.OPTIONAL wired wall controller (I07917620) and, for preparing the in-wall connections, the IVAR.INST installation box (I07000584).
Rating conditions: cooling at 27 °C room temperature and 7 °C inlet water, heating at 20 °C and 45 °C inlet water, always with a water temperature difference of 5 K.
Technical data
| Code | I07009585 |
| Manufacturer | IVAR |
| Type | IVAR.EGWW 15 |
| Version | wall-mounted, two-pipe |
| Heating capacity (medium speed) | 4.10 kW (3.50–4.50 kW) |
| Total cooling capacity (medium speed) | 3.70 kW (3.10–4.10 kW) |
| Airflow (medium speed) | 700 m³/h (600–850 m³/h) |
| Sound pressure (medium speed, 2.5 m) | 44 dB(A) |
| Power supply | 230 V / 1 ph / 50 Hz |
| Max. power input | 60 W |
| Max. operating pressure | 16 bar |
| Water / condensate connection | 1/2" / 5/8" |
| Dimensions (W × H × D) | 940 × 298 × 200 mm |
| Net weight | 12 kg |
Additional parameters
| Category: | IVAR.EGWW - Fan Coil Silence |
|---|---|
| Warranty: | 2 years |
| Weight: | 12 kg |
| Code: | I07009585 |
| Manufacturer: | IVAR |
| Type: | IVAR.EGWW 15 |
| Version: | wall-mounted, two-pipe |
| Heating capacity (medium speed): | 4.10 kW (3.50–4.50 kW) |
| Total cooling capacity (medium speed): | 3.70 kW (3.10–4.10 kW) |
| Airflow (medium speed): | 700 m³/h (600–850 m³/h) |
| Sound pressure (medium speed, 2.5 m): | 44 dB(A) |
| Power supply: | 230 V / 1 ph / 50 Hz |
| Max. power input: | 60 W |
| Max. operating pressure: | 16 bar |
| Water / condensate connection: | 1/2" / 5/8" |
| Dimensions (W × H × D): | 940 × 298 × 200 mm |
| Net weight: | 12 kg |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!
IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.
Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.
Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.
“Made in Italy” adds value
IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.
The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.
Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.
The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.
As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.